Dynamite Friction 633-47062R Disc Brake Rotor - Front Right

Reliable Performance with Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (Part Number 633-47062R) offers a durable and efficient braking solution for a range of GM vehicles. Designed to meet the demands of models like the Chevrolet Camaro and GMC S10 Blazer, this rotor combines advanced features to maintain consistent stopping power under various driving conditions.

• Disc Type: Vented disc brake rotor with drilled and slotted surface
• Finish: Zinc black hat finish with rust-resistant coating
• Dimensions: 267 mm outside diameter, 26.3 mm nominal thickness, 24.5 mm discard thickness
• Bolt Pattern: 5 lug holes with 12x1.5 mm bolt hole diameter and 120.7 mm bolt circle diameter
• Directional brake surface for optimized heat dissipation and performance

Product Line Features of DFC Brake Rotor - Drilled and Slotted - Black

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors engineered for enhanced heat management and corrosion resistance. The drilled and slotted surface design improves brake pad bite and helps evacuate gases and debris, while the zinc black hat finish provides additional protection against rust. This product line is tailored for vehicles requiring reliable vented rotors with directional braking surfaces.

Technical Specifications and Compatibility

This vented disc brake rotor features a 267 mm outside diameter and a nominal thickness of 26.3 mm, with a discard thickness of 24.5 mm to ensure safe replacement intervals. The rotor includes five 12x1.5 mm bolt holes arranged on a 120.7 mm bolt circle diameter, compatible with a center hole diameter of 70.5 mm. The directional slotted and drilled surface enhances braking efficiency by improving pad contact and heat dissipation. The zinc black hat finish and rust-resistant coating extend the rotor's service life by reducing corrosion.

Compatible Vehicles

• Buick Regal and Century
• Chevrolet Camaro, Malibu, Monte Carlo, S10, S10 Blazer, El Camino
• GMC Jimmy, Sonoma, S15, S15 Jimmy
• Oldsmobile Cutlass, Cutlass Cruiser, Cutlass Salon, Cutlass Supreme
• Pontiac Firebird, Grand Prix, Bonneville
• Buick Blazer

Common Issues Addressed by This Rotor

• Brake fade caused by overheating during aggressive driving
• Uneven brake pad wear due to poor heat dissipation
• Corrosion and rust buildup on rotor surfaces
• Reduced braking performance from glazed or warped rotors
• Noise and vibration from worn or damaged rotors

Installation Notes and Tips

Ensure the rotor surface is clean and free of contaminants before installation. Verify that the rotor thickness meets or exceeds the discard thickness of 24.5 mm to maintain safety standards. Use proper torque specifications for the 5 lug bolts with 12x1.5 mm thread size. The directional slotted and drilled surface should be installed following the rotation direction indicated on the rotor to optimize performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the 633-47062R rotor to meet OEM standards for fit and function. The rust-resistant coating and zinc black hat finish contribute to long-term durability. Please refer to Dynamite Friction's warranty policy for specific coverage details.