Dynamite Friction 633-56020L Disc Brake Rotor - Rear Left

Overview of the DFC Brake Rotor - Drilled and Slotted - Black

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-56020L) is engineered for reliable braking performance on Ford Crown Victoria, Mercury Grand Marquis, and Marauder models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.

• Compatible with Ford Crown Victoria, Mercury Grand Marquis, and Marauder
• Part number 633-56020L for precise identification
• Vented rotor design for improved cooling
• Directional drilled and slotted surface for enhanced brake pad bite and debris removal
• Rust-resistant zinc black hat finish
• 5 bolt holes with 14.3 mm diameter and 114.3 mm bolt circle diameter
• Nominal thickness of 19 mm with discard thickness at 18 mm
• Overall diameter of 295 mm and height of 58.6 mm

Product Line Details: DFC Brake Rotor - Drilled and Slotted - Black

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that combine drilled holes and slots on a directional surface. This design improves water and gas evacuation during braking, reducing brake fade and maintaining consistent performance. The zinc black coating on the rotor hat provides corrosion resistance, extending the rotor's service life. This product line is tailored for vehicles requiring vented rotors with enhanced heat management and durability.

Technical Specifications and Features

This disc brake rotor is vented to allow air circulation between the rotor surfaces, which helps dissipate heat generated during braking. The rotor's outside diameter measures 295 mm, with a height of 58.6 mm and a center hole diameter of 70.7 mm. It features five bolt holes, each 14.3 mm in diameter, arranged on a 114.3 mm bolt circle diameter, matching the wheel hub pattern of compatible vehicles. The nominal thickness is 19 mm, with a discard thickness of 18 mm, indicating when the rotor should be replaced to maintain safe braking performance.

Applications and Problem Solving

• Replacement rotor for worn or warped rotors on Ford Crown Victoria, Mercury Grand Marquis, and Marauder
• Improves braking consistency by reducing heat buildup and brake fade
• Helps prevent rust and corrosion with zinc black coated hat
• Enhances brake pad cleaning and water dispersion with drilled and slotted surface
• Supports safe braking under demanding driving conditions

Installation Notes and Tips

Ensure the rotor is installed on compatible vehicles: Ford Crown Victoria, Mercury Grand Marquis, and Marauder. Verify the bolt pattern matches the vehicle hub (5 lug holes, 114.3 mm bolt circle diameter). Clean the rotor surface before installation to remove any protective coatings or residues. Use proper torque specifications for lug nuts to avoid rotor warping. It is recommended to replace brake pads simultaneously to ensure optimal braking performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the 633-56020L rotor to meet industry standards for durability and performance. The rust-resistant coating on the rotor hat helps extend service life. While specific warranty details are not provided, Dynamite Friction products typically adhere to quality control measures to ensure reliability and fitment accuracy for Ford Crown Victoria, Mercury Grand Marquis, and Marauder vehicles.