Dynamite Friction 633-58019L Disc Brake Rotor - Rear Left

Overview of the DFC Brake Rotor - Drilled and Slotted - Black

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-58019L) is engineered for Acura and Honda vehicles, specifically designed to meet the braking demands of the Element and TL models. This solid disc brake rotor features a directional, slotted, and drilled surface to enhance braking performance and heat dissipation.

• Compatible with Acura Element and Honda TL models
• Part number 633-58019L for precise identification
• Directional slotted and drilled surface for improved brake pad contact and cooling
• Solid rotor design with a nominal thickness of 9 mm and discard thickness of 7.5 mm
• Zinc black hat finish with rust-resistant coating for durability
• Five bolt holes with 12.45 mm diameter and 114.3 mm bolt circle diameter
• Overall diameter of 282 mm and height of 58.7 mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Black is a solid disc brake rotor designed to provide consistent braking performance for Acura Element and Honda TL vehicles. The rotor’s surface is both drilled and slotted, which helps to reduce brake fade by allowing gases and debris to escape while improving pad bite. The directional brake surface ensures optimal contact and heat dissipation during braking. The rotor has a nominal thickness of 9 mm and a discard thickness of 7.5 mm, indicating when replacement is necessary to maintain safety and performance.

The rotor’s hat is finished in zinc black, providing corrosion resistance, complemented by an overall rust-resistant coating. It features five bolt holes with a diameter of 12.45 mm and a bolt circle diameter of 114.3 mm, matching the stud/lug hole pattern for secure installation. The overall diameter of 282 mm and height of 58.7 mm are designed to fit the specified vehicle models precisely.

About the DFC Brake Rotor - Drilled and Slotted - Black Product Line

The DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on rotors that combine drilled holes and slots with a durable black zinc finish. This product line is engineered to provide enhanced heat dissipation and improved braking response while offering corrosion resistance. These rotors are designed for drivers who require reliable stopping power and rotor longevity in Acura and Honda vehicles such as the Element and TL.

Common Applications and Problem Solving

• Reduces brake fade during aggressive or prolonged braking
• Improves heat dissipation to prevent rotor warping
• Minimizes brake dust and debris buildup on the rotor surface
• Restores braking performance on Acura Element and Honda TL models
• Prevents rust and corrosion for extended rotor life

Installation Notes and Tips

• Ensure rotor thickness is above the discard thickness of 7.5 mm before installation
• Verify bolt hole pattern matches 5 lug holes with 12.45 mm diameter and 114.3 mm bolt circle diameter
• Clean rotor surface before installation to remove any protective coatings or residues
• Torque lug nuts to manufacturer specifications to avoid rotor damage
• Inspect brake pads and calipers for wear during rotor replacement

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor - Drilled and Slotted - Black to meet industry standards for durability and performance. The rotor includes a rust-resistant coating and zinc black hat finish to extend service life. Please refer to Dynamite Friction’s warranty policy for specific coverage details related to this part number 633-58019L.