Dynamite Friction 633-59025L Disc Brake Rotor - Rear Left

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-59025L) is engineered for Acura and Honda vehicles, specifically designed to meet the braking demands of models like the Accord and CL. This solid disc brake rotor features a directional, slotted, and drilled surface to enhance braking performance and heat dissipation.

• Compatible with Acura and Honda Accord and CL models
• Part number 633-59025L for precise identification
• Solid rotor design with drilled and slotted surface
• Directional brake surface for optimized performance
• Rust-resistant zinc black hat finish
• Nominal thickness of 9 mm and discard thickness of 8 mm
• Four bolt holes with 12.6 mm diameter and 114.3 mm bolt circle diameter
• Outside diameter of 260 mm and overall height of 48.2 mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Black is a solid rotor with a 260 mm outside diameter and an overall height of 48.2 mm, designed to fit Acura and Honda Accord and CL models. The rotor surface is both drilled and slotted, which helps to reduce brake fade by improving heat dissipation and removing brake dust and gases. The directional surface design ensures optimal contact with brake pads for consistent stopping power.

The rotor’s hat is finished with a zinc black coating that provides rust resistance, extending the rotor’s service life. It features four bolt holes with a diameter of 12.6 mm and a bolt circle diameter of 114.3 mm, matching the stud/lug hole pattern of the specified vehicles. The nominal thickness is 9 mm, with a discard thickness of 8 mm, indicating when the rotor should be replaced to maintain safe braking performance.

About the DFC Brake Rotor - Drilled and Slotted - Black Product Line

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on delivering rotors with enhanced heat management and durability. The drilled and slotted design improves braking efficiency by allowing better heat dissipation and debris removal, while the black zinc coating on the hat offers corrosion resistance. This product line is tailored for drivers seeking reliable braking components compatible with specific Acura and Honda models.

Applications and Problem Solving

• Improves braking performance for Acura Accord and Honda CL vehicles
• Reduces brake fade during heavy or repeated braking
• Helps prevent rotor warping caused by excessive heat
• Minimizes rust and corrosion on the rotor hat
• Maintains consistent braking feel with directional surface design

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 8 mm before installation. Clean the rotor surface to remove any protective coatings or debris prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 114.3 mm bolt circle diameter and 12.6 mm bolt hole diameter. Proper torque specifications should be followed to avoid rotor warping.

Quality Assurance

Dynamite Friction manufactures this rotor to meet OEM specifications for fitment and performance on Acura and Honda Accord and CL models. The rust-resistant zinc black finish on the rotor hat helps extend service life. Please refer to the manufacturer’s warranty documentation for specific coverage details related to the part number 633-59025L.