Dynamite Friction 633-59026R Disc Brake Rotor - Rear Right

Overview of the DFC Brake Rotor - Drilled and Slotted - Black

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-59026R) is engineered for Acura and Honda vehicles, including the Accord, Civic, Integra, and RSX models. This solid disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation.

• Compatible with Acura and Honda Accord, Civic, Integra, and RSX
• Part number 633-59026R for precise identification
• Solid rotor with drilled and slotted surface for improved braking
• Zinc black hat finish with rust-resistant coating
• Directional brake surface for optimized performance
• 5 bolt holes with 12.6 mm diameter and 114.3 mm bolt circle diameter
• Nominal thickness of 10 mm and discard thickness of 8 mm
• Outside diameter of 260 mm and overall height of 48.3 mm

Product Line Details: DFC Brake Rotor - Drilled and Slotted - Black

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction offers rotors designed with both drilled holes and slots to aid in heat dissipation and debris removal. The black zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life. This product line focuses on solid rotors with directional surfaces, suitable for vehicles requiring reliable braking performance under various driving conditions.

Technical Specifications and Features

This disc brake rotor is a solid type with a nominal thickness of 10 mm and a discard thickness of 8 mm, ensuring durability and safety. The rotor's surface is both drilled and slotted, which helps reduce brake fade by allowing gases and dust to escape during braking. The directional surface design improves water and debris evacuation, maintaining consistent braking performance. The rotor features a zinc black finish on the hat for rust resistance, while the plain disc finish complements the drilled and slotted surface. It has five bolt holes with a diameter of 12.6 mm and a bolt circle diameter of 114.3 mm, matching the stud/lug hole pattern for Acura and Honda models listed.

Applications and Problem Solving

• Replaces worn or warped rotors on Acura and Honda Accord, Civic, Integra, and RSX
• Improves braking performance by reducing heat buildup and brake fade
• Helps prevent rust and corrosion with zinc black coating
• Addresses brake noise and vibration issues caused by uneven rotor surfaces
• Enhances water and debris clearance for consistent braking in wet conditions

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 8 mm before installation. Clean the rotor surface to remove any protective coating or residue before mounting. Verify bolt hole alignment with the vehicle’s hub using the 5-bolt, 114.3 mm bolt circle pattern. Properly torque lug nuts to manufacturer specifications to avoid rotor warping. It is recommended to replace brake pads when installing new rotors for optimal performance.

Quality Assurance

Dynamite Friction manufactures the DFC Brake Rotor - Drilled and Slotted - Black to meet or exceed OEM specifications for fit and function. The rust-resistant zinc black coating on the rotor hat extends service life by protecting against corrosion. While no specific warranty information is provided, this rotor is designed for reliable performance on compatible Acura and Honda vehicles when installed and maintained according to manufacturer guidelines.