Dynamite Friction 633-59031R Disc Brake Rotor - Rear Right

Overview of DFC Brake Rotor for Acura and Honda

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-59031R) is engineered for reliable braking performance on Acura and Honda vehicles, specifically designed for the Civic and EL models. This rotor combines a solid construction with a directional, slotted and drilled surface to enhance heat dissipation and braking consistency.

• Compatible with Acura Civic and Honda Civic EL models
• Part number 633-59031R for precise identification
• Directional slotted and drilled surface for improved brake pad contact
• Solid rotor design with zinc black hat finish for corrosion resistance
• Rust resistant coating extends rotor life
• Four bolt holes with 12.7 mm diameter and 100 mm bolt circle diameter
• Nominal thickness of 10 mm with discard thickness at 8 mm
• Outside diameter of 260 mm and overall height of 48.5 mm

Detailed Product Features and Specifications

This DFC Brake Rotor features a solid disc design with a directional surface that is both drilled and slotted. The drilled holes and slots help to reduce heat buildup and remove brake dust, which can improve braking performance and reduce fade during extended use. The rotor’s nominal thickness is 10 mm, with a discard thickness of 8 mm, ensuring a clear maintenance threshold for safety. The zinc black finish on the rotor hat provides additional protection against rust and corrosion, complementing the rust resistant coating applied to the entire rotor. The rotor includes four bolt holes with a diameter of 12.7 mm and a bolt circle diameter of 100 mm, matching the stud/lug hole pattern for secure mounting. With an outside diameter of 260 mm and an overall height of 48.5 mm, this rotor is designed to meet the exact specifications required for Acura Civic and Honda Civic EL brake systems.

About the DFC Brake Rotor - Drilled and Slotted - Black Line

The DFC Brake Rotor - Drilled and Slotted - Black product line by Dynamite Friction focuses on delivering rotors that combine enhanced heat dissipation with corrosion resistance. The drilled and slotted design improves braking efficiency by allowing gases and debris to escape, while the black zinc finish on the rotor hat adds durability against environmental wear. This line is tailored for drivers seeking rotors that maintain consistent performance under demanding conditions without compromising longevity.

Common Applications and Problem Solving

• Reduces brake fade caused by excessive heat during heavy braking
• Improves braking response and pad bite with slotted and drilled surface
• Prevents rust and corrosion on rotor surfaces for longer service life
• Maintains structural integrity with solid rotor design for Acura and Honda Civic models
• Ensures proper fitment and secure mounting with precise bolt hole specifications

Installation Notes and Tips

When installing the 633-59031R rotor on Acura Civic or Honda Civic EL models, ensure the rotor surface is clean and free of any protective coatings before mounting. Verify the bolt hole alignment with the vehicle’s hub using the 100 mm bolt circle diameter and 12.7 mm bolt hole diameter. It is recommended to replace brake pads simultaneously to optimize braking performance. Follow manufacturer torque specifications for lug nuts to avoid rotor warping.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor - Drilled and Slotted - Black to meet industry standards for durability and performance. The rotor includes a rust resistant coating and zinc black finish to extend service life. Warranty details are provided by the manufacturer and should be reviewed at the time of purchase to confirm coverage terms.