Dynamite Friction 633-59034R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-59034R) is engineered for Acura and Honda vehicles, including Accord, Civic, CR-Z, Fit, and ILX models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation.

• Compatible with Acura and Honda Accord, Civic, CR-Z, Fit, and ILX
• Part number 633-59034R for precise identification
• Vented rotor design for improved cooling
• Directional drilled and slotted surface for enhanced brake pad bite and debris removal
• Black zinc-coated hat finish for corrosion resistance
• Rust-resistant coating on rotor surface
• 5 bolt holes with 12.3 mm diameter and 114.3 mm bolt circle diameter
• Nominal thickness of 23 mm with discard thickness at 21 mm
• Overall diameter of 282 mm and height of 47.3 mm

Details on the DFC Brake Rotor - Drilled and Slotted - Black Line

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that combine drilled holes and slots with a black zinc-coated hat finish. This design improves heat dissipation and reduces brake fade while providing corrosion resistance. The directional surface pattern optimizes braking efficiency by channeling gases and debris away from the contact surface, making it suitable for daily driving and moderate performance applications on compatible Acura and Honda models.

Technical Specifications and Features

This disc brake rotor is vented to allow air circulation between the rotor faces, which helps maintain lower operating temperatures during braking. The rotor’s nominal thickness is 23 mm, with a discard thickness of 21 mm, ensuring safe replacement intervals. The rotor features a plain disc finish with a zinc black hat finish that resists rust and corrosion. The 5 bolt holes and stud/lug holes have a diameter of 12.3 mm, arranged on a 114.3 mm bolt circle diameter, matching factory specifications for Acura and Honda vehicles listed.

Applications and Problem Solving

• Replaces worn or warped rotors on Acura and Honda Accord, Civic, CR-Z, Fit, and ILX models
• Addresses brake fade caused by overheating through vented design
• Improves braking response and pad bite with slotted and drilled surface
• Reduces rust and corrosion on rotor hats with zinc black coating
• Maintains braking performance by preventing debris buildup on rotor surface

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 21 mm before installation. Clean the rotor surface to remove any protective coatings or residues before mounting. Verify bolt hole alignment with the vehicle’s hub using the 5-bolt, 114.3 mm bolt circle pattern. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the rotation arrow pointing in the correct direction of wheel rotation.

Quality Assurance

Dynamite Friction manufactures the DFC Brake Rotor - Drilled and Slotted - Black to meet or exceed OEM standards for fit, form, and function. The rotor includes a rust-resistant coating and zinc black hat finish to extend service life. While no specific warranty information is provided, the product is designed for reliable performance on compatible Acura and Honda vehicles when installed and maintained properly.