Dynamite Friction 633-59039R Disc Brake Rotor - Front Right

Drilled and Slotted Front Right Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-59039R, is a vented disc brake rotor built for the front right position on select Honda Accord models. It features a slotted X drilled surface, a zinc black hat finish, and a rust resistant coating for added corrosion protection.

Compatible with 2013-2022 Honda Accord front right brake applications, this rotor is sized with a 293 mm outside diameter, 47.5 mm overall height, 64.1 mm center hole diameter, and 5-lug, 114.3 mm bolt circle dimensions. The directional braking surface supports consistent rotor orientation during service. Part number 633-59039R is also identified by the DFC Brake Rotor - Drilled and Slotted - Black line.

• Slotted X drilled braking surface
• Vented rotor construction
• Plain disc finish with zinc black hat finish
• Rust resistant coating
• 5 bolt holes and 5 stud/lug holes
• 114.3 mm bolt circle diameter
• 293 mm outside diameter
• 64.1 mm center hole diameter

Product Line Details

The DFC Brake Rotor - Drilled and Slotted - Black line focuses on rotor designs that combine drilled and slotted surfaces with a black-coated hat for a cleaner appearance and added corrosion resistance. For Honda Accord front right service, 633-59039R provides the specified rotor dimensions and directional surface layout needed for the listed fitment.

What This Rotor Helps Address

• Brake pulsation caused by worn or uneven rotor surfaces
• Reduced braking consistency from heat buildup
• Corrosion on exposed rotor and hat surfaces
• Noise or vibration associated with rotor wear
• Front right rotor replacement on a 2013-2022 Honda Accord

Installation Notes and Tips

Verify rotor thickness before installation: nominal thickness is 25 mm and discard thickness is 23 mm. Confirm the front right position, 5-lug pattern, 114.3 mm bolt circle, and 64.1 mm center bore before service. Because this rotor uses a directional braking surface, install it in the correct orientation for the vehicle side.

Quality Assurance

This rotor is built with a rust resistant coating and a zinc black hat finish to support long-term appearance and corrosion resistance in brake service. Confirm all measurements and vehicle fitment against the listed application before installation.