Dynamite Friction 633-59044R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-59044R) is engineered for Acura MDX and Honda Pilot models. Designed to provide reliable braking performance, this rotor features a directional, slotted and drilled surface to enhance heat dissipation and maintain consistent stopping power.

• Compatible with Acura MDX and Honda Pilot vehicles
• Directional slotted and drilled disc surface for improved brake cooling
• Solid rotor design with zinc black hat finish for corrosion resistance
• Nominal thickness of 11.1 mm and discard thickness of 9.5 mm
• 5 bolt holes with 12.6 mm diameter and 114.3 mm bolt circle diameter
• Overall diameter of 313 mm and height of 55.8 mm
• Rust resistant coating to extend rotor life

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Black is a solid disc brake rotor with a 313 mm outside diameter and a 55.8 mm overall height, designed specifically for Acura MDX and Honda Pilot models. The rotor surface is both drilled and slotted, which helps to reduce brake fade by allowing gases and debris to escape, improving braking consistency under demanding conditions. The directional brake surface ensures optimal performance when installed correctly.

The rotor’s hat is finished with a zinc black coating, providing enhanced rust resistance and durability. It features five bolt holes with a diameter of 12.6 mm and a bolt circle diameter of 114.3 mm, matching the stud/lug hole pattern of the specified vehicles. The nominal thickness of 11.1 mm ensures structural integrity, while the discard thickness of 9.5 mm indicates when replacement is necessary to maintain safe braking performance.

About the DFC Brake Rotor - Drilled and Slotted - Black Product Line

The DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on rotors that combine drilled holes and slots to improve heat dissipation and brake pad cleaning. This product line is designed to meet the demands of drivers who require consistent braking performance and corrosion resistance. The black zinc finish on the rotor hat adds an extra layer of protection against rust, making it suitable for various driving conditions.

Common Applications and Problem Solving

• Reduces brake fade during heavy braking or towing
• Improves heat dissipation to prevent rotor warping
• Helps maintain consistent brake pad contact and performance
• Resists rust and corrosion for longer service life
• Compatible replacement for worn or damaged rotors on Acura MDX and Honda Pilot

Installation Notes and Tips

• Ensure rotor is installed with the directional surface facing the correct rotation direction
• Check rotor thickness before installation; replace if below discard thickness of 9.5 mm
• Clean rotor surface before mounting to remove any protective coatings or debris
• Torque lug nuts to manufacturer specifications to avoid rotor damage
• Inspect brake pads and hardware during installation for optimal system performance

Quality Assurance and Warranty

Dynamite Friction rotors are manufactured to meet or exceed OEM specifications for fit and function. The rust resistant coating and zinc black hat finish contribute to the rotor’s durability. While specific warranty details are not provided here, Dynamite Friction products typically come with a limited warranty against manufacturing defects. Always consult product documentation or the manufacturer for complete warranty information.