Dynamite Friction 633-63086L Disc Brake Rotor - Rear Left

Overview of the DFC Brake Rotor - Drilled and Slotted - Black

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-63086L) is engineered for Mercedes-Benz C200, C250, and C300 models. Designed to enhance braking performance, this rotor features a solid, directional surface with drilled and slotted patterns to improve heat dissipation and reduce brake fade.

• Compatible with Mercedes-Benz C200, C250, and C300
• Part number: 633-63086L
• Solid disc brake rotor with drilled and slotted surface
• Black zinc-coated hat finish for corrosion resistance
• Rust resistant coating applied
• 5 bolt holes with 112mm bolt circle diameter
• Nominal thickness of 10mm and discard thickness of 8.3mm
• Directional brake surface for optimized performance
• Overall diameter of 300mm and height of 57.6mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Black is a solid rotor designed specifically for select Mercedes-Benz vehicles, including the C200, C250, and C300. The rotor measures 300mm in outside diameter with an overall height of 57.6mm, ensuring proper fitment and compatibility. It features a drilled and slotted surface type that helps to dissipate heat more effectively during braking, reducing the risk of brake fade under demanding conditions.

The rotor’s hat is finished with a zinc black coating, providing enhanced corrosion resistance and durability. Additionally, the entire rotor is treated with a rust-resistant coating to extend service life. The rotor includes five bolt holes with a bolt circle diameter of 112mm and stud/lug hole diameter of 15.3mm, matching the factory specifications for the intended Mercedes-Benz models.

About the DFC Brake Rotor - Drilled and Slotted - Black Product Line

The DFC Brake Rotor - Drilled and Slotted - Black line from Dynamite Friction focuses on delivering rotors with enhanced heat management and corrosion resistance. The drilled and slotted design improves braking efficiency by allowing gases and debris to escape, while the black zinc hat finish and rust-resistant coating protect against environmental wear. This product line is tailored for drivers seeking reliable, performance-oriented rotors for their Mercedes-Benz vehicles.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Mercedes-Benz C200, C250, and C300
• Improves heat dissipation to reduce brake fade during heavy braking
• Helps prevent rust and corrosion on brake components
• Addresses brake noise and vibration caused by uneven rotor surfaces
• Maintains consistent braking performance under varied driving conditions

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 8.3mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 5-bolt, 112mm bolt circle pattern. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the correct rotation direction as indicated by the surface pattern.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor - Drilled and Slotted - Black to meet or exceed OEM standards for fit, form, and function. The rust-resistant coatings and zinc black hat finish contribute to long-term durability. Warranty details are provided by the manufacturer and should be confirmed at the time of purchase.