Dynamite Friction 633-73022L Disc Brake Rotor - Rear Left

Overview of the DFC Brake Rotor - Drilled and Slotted - Black

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-73022L) is engineered for Audi A6 Quattro and Allroad Quattro models. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation.

• Compatible with Audi A6 Quattro and Allroad Quattro
• Part number: 633-73022L
• Solid rotor with drilled and slotted surface
• Zinc black hat finish with rust-resistant coating
• 5 bolt holes with 112 mm bolt circle diameter
• Nominal thickness of 10 mm and discard thickness of 8 mm
• Directional brake surface for optimized performance
• Overall diameter of 255 mm and height of 47.8 mm

Product Line Details: DFC Brake Rotor - Drilled and Slotted - Black

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction offers rotors designed with both drilled holes and slots to improve brake pad bite and reduce heat buildup. The black zinc coating on the rotor hat provides corrosion resistance, extending rotor life. This product line focuses on solid rotors with directional surfaces, suitable for vehicles requiring reliable braking under varied driving conditions.

Technical Specifications and Features

This disc brake rotor is a solid type with a nominal thickness of 10 mm and a discard thickness of 8 mm, ensuring safe replacement intervals. The rotor’s surface is both drilled and slotted, which helps evacuate gases and debris from the brake pad interface, improving braking consistency. The rotor hat is finished in zinc black, providing rust resistance to maintain structural integrity over time. It features five bolt holes with a 112 mm bolt circle diameter and a center hole diameter of 68 mm, matching the factory specifications for Audi A6 Quattro and Allroad Quattro models.

Applications and Problem Solving

• Replacement rotor for worn or warped brake rotors on Audi A6 Quattro and Allroad Quattro
• Improves heat dissipation to reduce brake fade during heavy braking
• Slotted and drilled design helps maintain consistent braking performance in wet conditions
• Rust-resistant coating prevents premature corrosion and rotor degradation
• Directional surface optimizes braking efficiency and pad contact

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 8 mm before installation. Clean the rotor surface to remove any protective coatings or oils prior to mounting. Verify bolt hole alignment with the 5-lug, 112 mm bolt circle pattern on your Audi A6 Quattro or Allroad Quattro. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the correct rotation direction for optimal performance.

Quality Assurance

Dynamite Friction manufactures this rotor to meet OEM specifications for fit and function. The rust-resistant zinc black coating on the rotor hat enhances durability. While no specific warranty information is provided, the rotor’s design and materials support reliable braking performance consistent with factory standards.