Dynamite Friction 830-58030R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-58030R) is engineered for Acura MDX models requiring reliable braking performance. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.

• Compatible with Acura MDX vehicles
• Part number: 830-58030R
• Solid rotor with drilled and slotted surface
• Nominal thickness: 11 mm; discard thickness: 9 mm
• Overall diameter: 330 mm; height approximately 45.7 mm
• Rust resistant coating for extended durability
• Geospec silver grey hat finish
• 5 bolt holes with 14.7 mm diameter and 120 mm bolt circle diameter
• Directional brake surface for optimized performance

Detailed Product Features and Specifications

This disc brake rotor is designed with a solid construction and a directional surface featuring both drilled holes and slots. The drilled and slotted design helps to reduce brake fade by improving heat dissipation and allowing gases and debris to escape during braking. The rotor measures 330 mm in outside diameter and has a nominal thickness of 11 mm, with a discard thickness of 9 mm to ensure safe replacement intervals. The hat section is finished in Geospec silver grey, providing corrosion resistance along with a rust resistant coating applied to the entire rotor surface. The rotor includes five bolt holes, each 14.7 mm in diameter, arranged on a 120 mm bolt circle diameter, matching the Acura MDX specifications. The center hole diameter is 70.1 mm, ensuring proper fitment and alignment.

About the DFC Geoperformance Rotor - Drilled and Slotted Line

The DFC Geoperformance Rotor - Drilled and Slotted product line by Dynamite Friction focuses on delivering rotors with enhanced surface designs to improve braking efficiency and thermal management. This line combines drilled holes and slots in a directional pattern to optimize brake pad contact and reduce heat buildup, which is critical for maintaining consistent braking performance in SUVs like the Acura MDX. The rotors in this line also feature protective coatings to resist rust and corrosion, extending the rotor's service life.

Applications and Problem Solving

• Replacement rotor for worn or warped Acura MDX disc brakes
• Improves heat dissipation to reduce brake fade during heavy braking
• Helps prevent brake pad glazing by maintaining a clean rotor surface
• Addresses corrosion issues with rust resistant coating
• Maintains braking performance under varied driving conditions

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 9 mm before installation. Clean the rotor surface to remove any protective oils or residues prior to mounting. Verify bolt hole alignment with the 120 mm bolt circle diameter and 14.7 mm bolt hole diameter for proper fitment on the Acura MDX. Use proper torque specifications for lug nuts to avoid rotor warping. Directional rotors must be installed with the correct rotation direction as indicated by the surface pattern.

Quality Assurance

Dynamite Friction rotors undergo rigorous quality control to meet OEM standards for fit and function. The rust resistant coating and Geospec silver grey hat finish contribute to long-term durability. While no specific warranty information is provided, these rotors are manufactured to maintain consistent braking performance and safety for Acura MDX vehicles.