Dynamite Friction 830-59032L Disc Brake Rotor - Rear Left

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-59032L) is engineered for Acura and Honda vehicles, specifically designed to meet the braking demands of models like the Accord, ILX, and TSX. This solid disc brake rotor features a directional, slotted and drilled surface to enhance braking performance and heat dissipation.

• Nominal thickness: 9 mm with a discard thickness of 8 mm
• Solid rotor design with drilled and slotted surface
• Directional brake surface for optimized performance
• Rust resistant coating for extended durability
• Geospec silver grey hat finish for corrosion protection
• Five bolt holes with 12.6 mm diameter and 114.1 mm bolt circle diameter
• Outside diameter of 282 mm and overall height of 48.8 mm

Detailed Product Features and Specifications

This Dynamite Friction rotor is a solid disc type, measuring 282 mm in outside diameter and 48.8 mm in overall height. The rotor’s nominal thickness is 9 mm, with a discard thickness of 8 mm, ensuring precise wear limits for safe operation. The rotor surface is both drilled and slotted, which helps to reduce brake fade by improving heat dissipation and removing brake dust and gases during braking. The directional surface design further enhances braking efficiency by channeling heat and debris away from the contact area.

The rotor features a rust resistant coating and a Geospec silver grey finish on the hat, providing corrosion protection and maintaining structural integrity over time. It includes five bolt holes with a diameter of 12.6 mm and a bolt circle diameter of 114.1 mm, matching the stud/lug hole pattern for Acura and Honda Accord, ILX, and TSX models. The center hole diameter is 64.1 mm, ensuring proper fitment on the vehicle hub.

About the DFC Geoperformance Rotor - Drilled and Slotted Line

The DFC Geoperformance Rotor - Drilled and Slotted product line by Dynamite Friction focuses on delivering rotors with enhanced surface designs that improve braking performance and heat management. This line combines drilled holes and slots in a directional pattern to optimize airflow and debris removal, which is particularly beneficial for vehicles requiring reliable braking under varied driving conditions. The rotors in this line also feature protective coatings to resist rust and corrosion, extending rotor life.

Applications and Problem Solving

• Compatible with Acura and Honda models including Accord, ILX, and TSX
• Addresses brake fade caused by excessive heat buildup
• Reduces brake dust accumulation on rotor surface
• Helps prevent rust and corrosion on braking components
• Maintains consistent braking performance under demanding conditions

Installation Notes and Tips

Ensure the rotor is installed on compatible Acura or Honda models with the specified bolt pattern and dimensions. Verify the rotor thickness before installation; replace if below the discard thickness of 8 mm. Clean the rotor surface before mounting to remove any protective oils or residues. Proper torque specifications should be followed for the five lug bolts to ensure secure fitment and optimal performance.

Quality Assurance

Dynamite Friction manufactures the 830-59032L rotor to meet industry standards for durability and performance. The rust resistant coating and Geospec finish contribute to long-term reliability. While no specific warranty information is provided, the rotor is designed to maintain structural integrity and braking efficiency within the specified wear limits.