Dynamite Friction 830-59048R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-59048R) is engineered for Acura and Honda vehicles, specifically designed to meet the braking demands of CR-V and RDX models. This solid disc brake rotor features a directional, slotted and drilled surface to enhance braking performance and heat dissipation.

• Compatible with Acura CR-V and Honda RDX models
• Directional slotted and drilled surface for improved brake cooling
• Solid rotor design with 304.5 mm outside diameter
• Rust resistant coating for extended durability
• Geospec silver grey hat finish for corrosion resistance
• Nominal thickness of 9 mm with discard thickness at 7.5 mm
• 5 bolt holes with 12.6 mm diameter and 114.3 mm bolt circle diameter
• Center hole diameter of 64.1 mm for precise fitment

Detailed Product Description

The 830-59048R rotor from Dynamite Friction is a solid disc brake rotor designed to provide reliable stopping power for Acura CR-V and Honda RDX vehicles. Its 304.5 mm outside diameter and 60.8 mm overall height ensure proper fitment and compatibility. The rotor features a directional surface with both drilled holes and slots, which help to dissipate heat and reduce brake fade during demanding driving conditions. The rotor’s plain disc finish combined with a Geospec silver grey hat finish offers corrosion resistance, supported further by a rust resistant coating. The 5-bolt hole pattern with 12.6 mm diameter and 114.3 mm bolt circle diameter matches factory specifications for secure installation.

DFC Geoperformance Rotor - Drilled and Slotted Product Line

The DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and heat management. This product line is designed to enhance braking performance while maintaining durability and corrosion resistance, making it suitable for daily driving and moderate performance applications. The 830-59048R rotor exemplifies these characteristics with its directional surface and rust resistant features.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Acura CR-V and Honda RDX
• Improves heat dissipation to reduce brake fade during extended braking
• Helps prevent rust and corrosion on braking surfaces
• Addresses brake noise and vibration issues caused by uneven rotor surfaces
• Maintains proper braking performance with precise fitment and thickness specifications

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 7.5 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify the 5-lug bolt pattern and 114.3 mm bolt circle diameter match your vehicle’s hub. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the correct rotation direction for optimal performance.

Quality Assurance

Dynamite Friction rotors are manufactured to meet or exceed OEM standards for fit, form, and function. The rust resistant coating and Geospec silver grey hat finish contribute to long-term durability. While specific warranty details are not provided, Dynamite Friction products are subject to quality control processes to ensure consistent performance and reliability.