Dynamite Friction 830-59053R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-59053R) is engineered for Acura and Honda vehicles, including the MDX, Pilot, RLX, and ZDX models. This vented disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation.

• Nominal thickness: 28 mm with a discard thickness of 26 mm
• Vented rotor design for improved cooling
• Directional slotted and drilled surface for debris removal and heat management
• Rust resistant coating to extend rotor life
• Geospec silver grey hat finish for corrosion resistance and durability
• Five bolt holes with a 120 mm bolt circle diameter
• Outside diameter of 330 mm and overall height of 47.3 mm
• Center hole diameter of 70.1 mm and stud/lug hole diameter of 14.5 mm

About the DFC Geoperformance Rotor - Drilled and Slotted Line

The DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction is designed to provide reliable braking performance with enhanced heat dissipation and surface durability. The drilled and slotted surface pattern helps reduce brake fade by allowing gases and debris to escape, while the vented rotor construction improves airflow to maintain optimal operating temperatures. This product line is suitable for drivers seeking consistent braking performance under various driving conditions.

Product Details and Specifications

This disc brake rotor is constructed with a plain disc finish and a Geospec silver grey finish on the hat, providing corrosion resistance and a clean appearance. The rotor is vented, which means it has internal vanes to promote airflow and cooling during braking. The directional slotted and drilled surface is designed to channel away dust, water, and gases, improving pad contact and braking efficiency. With a 5-bolt hole pattern and a 120 mm bolt circle diameter, this rotor fits specific Acura and Honda models precisely. The rotor’s dimensions, including a 330 mm outside diameter and 47.3 mm overall height, ensure proper fitment and compatibility.

Compatible Vehicles and Applications

• Acura MDX
• Acura RLX
• Acura ZDX
• Honda Pilot

This rotor is ideal for replacing worn or damaged rotors on these vehicles, restoring braking performance and safety.

Common Issues Addressed by This Rotor

• Brake fade caused by overheating during extended braking
• Uneven brake pad wear due to poor rotor surface condition
• Corrosion and rust buildup on rotor surfaces
• Vibration or pulsation during braking from warped rotors
• Reduced braking efficiency in wet or dusty conditions

Installation Notes and Tips

Ensure the rotor is installed on compatible Acura or Honda models listed above. Verify the bolt hole pattern and rotor dimensions before installation. Clean the rotor surface to remove any protective coatings or residues before mounting. Properly torque all lug nuts to manufacturer specifications to avoid rotor warping. It is recommended to replace brake pads simultaneously to ensure optimal braking performance.

Quality Assurance and Warranty

Dynamite Friction manufactures this rotor with rust-resistant coatings and durable finishes to extend service life. The vented and directional design supports consistent braking performance. Warranty details are provided by the manufacturer and should be reviewed prior to purchase for specific coverage information.