Dynamite Friction 830-59054R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-59054R) is engineered for Acura and Honda vehicles, including the MDX, Odyssey, Pilot, and ZDX models. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance braking performance and heat dissipation.

• Nominal thickness: 11 mm with a discard thickness of 9 mm
• Overall height: 63.8 mm and outside diameter: 334 mm
• Directional slotted and drilled surface for improved brake pad contact and cooling
• Solid rotor construction with rust-resistant coating
• Geospec silver grey hat finish for corrosion resistance and durability
• 5 bolt holes with a bolt circle diameter of 120 mm
• Center hole diameter of 70.1 mm and stud/lug hole diameter of 14.6 mm

DFC Geoperformance Rotor - Drilled and Slotted Product Line

The DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on delivering rotors with enhanced surface designs that combine drilled holes and slots. This configuration helps reduce brake fade by improving heat dissipation and gas evacuation during braking. The directional surface pattern is optimized for specific vehicle applications, such as Acura MDX and Honda Pilot, ensuring consistent braking performance under various driving conditions.

Product Details and Specifications

This disc brake rotor is a solid type, measuring 334 mm in outside diameter and 63.8 mm in overall height. The rotor’s nominal thickness is 11 mm, with a discard thickness of 9 mm, indicating when replacement is necessary. The rotor surface is finished plain, while the hat features a Geospec silver grey coating that provides rust resistance and extends rotor life. The rotor includes five bolt holes arranged on a 120 mm bolt circle diameter, compatible with the specified Acura and Honda models. The directional slotted and drilled surface improves braking efficiency by allowing better heat dissipation and debris removal.

Applications and Problem Solving

• Compatible with Acura MDX, Honda Odyssey, Pilot, and ZDX models requiring solid disc brake rotors
• Addresses brake fade caused by excessive heat buildup during heavy braking
• Helps reduce brake pad glazing and uneven wear through improved surface design
• Prevents rust and corrosion on rotor surfaces with rust-resistant coating
• Maintains braking performance in wet conditions by channeling water away from the rotor surface

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 9 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 5-bolt, 120 mm bolt circle pattern. Properly torque lug nuts to manufacturer specifications to avoid rotor warping. Directional rotors must be installed with the correct rotation direction as indicated by the surface pattern.

Quality Assurance

Dynamite Friction manufactures the 830-59054R rotor to meet OEM specifications for fitment and performance on Acura and Honda vehicles. The rust-resistant coating and Geospec silver grey hat finish contribute to long-term durability. While no specific warranty information is provided, the rotor is designed to maintain consistent braking performance and structural integrity under normal operating conditions.