Dynamite Friction 830-59068R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-59068R) is engineered for Honda Civic models requiring reliable disc brake rotors. Designed with a directional slotted and drilled surface, this rotor enhances braking performance and heat dissipation under demanding conditions.

• Compatible with Honda Civic models
• Directional slotted and drilled disc surface for improved brake response
• Nominal thickness of 10 mm with a discard thickness of 9 mm
• Rust resistant coating for extended durability
• Geospec silver grey hat finish for corrosion protection
• 5 bolt holes with a bolt circle diameter of 114.3 mm
• Outside diameter of 282 mm and height of 37 mm
• Center hole diameter of 64 mm

Detailed Product Description

This Dynamite Friction rotor features a plain disc finish combined with a rust resistant coating to help prevent corrosion and maintain rotor integrity over time. The directional slotted and drilled surface design aids in channeling away gases and debris, reducing brake fade and improving overall stopping power. The rotor’s 5-bolt hole configuration with a 114.3 mm bolt circle diameter ensures proper fitment on compatible Honda Civic models. The hat section is finished in Geospec silver grey, providing additional protection against environmental wear.

The rotor’s nominal thickness is 10 mm, with a discard thickness of 9 mm, indicating when replacement is necessary to maintain safe braking performance. With an outside diameter of 282 mm and a height of 37 mm, this rotor meets the specifications required for precise fit and function.

About the DFC Geoperformance Rotor - Drilled and Slotted Line

The DFC Geoperformance Rotor - Drilled and Slotted product line by Dynamite Friction focuses on rotors designed to optimize braking efficiency through enhanced surface engineering. The drilled and slotted design improves heat dissipation and helps maintain consistent brake pad contact, which is critical for vehicles like the Honda Civic that demand reliable stopping power in various driving conditions.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Honda Civic vehicles
• Improves braking performance under high heat or heavy use
• Reduces brake fade caused by gas buildup between pad and rotor
• Helps prevent rust and corrosion on braking surfaces
• Addresses uneven brake pad wear due to rotor surface imperfections

Installation Notes and Tips

Ensure the rotor thickness is measured before installation; replace if below the discard thickness of 9 mm. Clean the rotor surface to remove any protective coatings or debris before mounting. Confirm bolt hole alignment with the 5-lug pattern and 114.3 mm bolt circle diameter for proper fitment on Honda Civic models. Use appropriate torque specifications for lug nuts to avoid rotor warping.

Quality Assurance

Dynamite Friction manufactures the 830-59068R rotor to meet industry standards for durability and performance. The rust resistant coating and Geospec silver grey hat finish contribute to long-term reliability. Warranty information is available through the manufacturer and should be consulted for specific coverage details.