Dynamite Friction 830-67050R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-67050R) is engineered for Nissan vehicles including Altima, Juke, Maxima, and Sentra models. Designed to enhance braking performance, this rotor features a directional, drilled and slotted surface to improve heat dissipation and maintain consistent stopping power.

• Disc type: Solid disc brake rotor
• Surface finish: Plain disc with Geospec silver grey hat finish
• Rust resistant coating for extended durability
• Directional drilled and slotted surface for improved brake pad bite and heat management
• Five bolt holes with a bolt circle diameter of 114.3 mm
• Nominal thickness of 9 mm and discard thickness of 8 mm
• Overall diameter of 292 mm and overall height approximately 62.25 mm
• Center hole diameter of 68 mm for precise fitment

DFC Geoperformance Rotor - Drilled and Slotted Product Line

The DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on rotors that combine drilled holes and slots in a directional pattern. This design aids in channeling gases, dust, and heat away from the braking surface, which helps maintain consistent braking performance under demanding conditions. The Geospec silver grey hat finish adds corrosion resistance and a clean appearance, making it suitable for Nissan Altima, Juke, Maxima, and Sentra vehicles requiring reliable rotor upgrades.

Detailed Product Description

This solid disc brake rotor is engineered with a nominal thickness of 9 mm and a discard thickness of 8 mm, ensuring a long service life before replacement is necessary. The rotor’s drilled and slotted surface is directional, which optimizes the removal of brake dust and heat buildup during braking. The plain disc finish combined with a rust-resistant coating and Geospec silver grey hat finish provides protection against corrosion, extending the rotor’s durability. With five bolt holes and a bolt circle diameter of 114.3 mm, this rotor is designed for precise fitment on compatible Nissan models. The overall diameter of 292 mm and height of approximately 62.25 mm ensure proper alignment and compatibility with the vehicle’s braking system.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Nissan Altima, Juke, Maxima, and Sentra
• Improves heat dissipation to reduce brake fade during extended braking
• Helps eliminate brake noise and vibration caused by uneven rotor surfaces
• Addresses corrosion issues with rust-resistant coating and durable finish
• Enhances braking consistency in wet or dusty conditions with drilled and slotted design

Installation Notes and Tips

Ensure the rotor surface is clean and free of any contaminants before installation. Verify the bolt hole pattern and center hole diameter match the vehicle specifications. It is recommended to replace brake pads when installing new rotors to maintain optimal braking performance. Torque all bolts to manufacturer specifications and check for proper rotor alignment to avoid vibration or uneven wear.

Quality Assurance

Dynamite Friction manufactures the 830-67050R rotor to meet or exceed OEM standards for fit, form, and function. The rust-resistant coating and Geospec silver grey hat finish contribute to long-term durability. While specific warranty details are not provided, Dynamite Friction products are designed for reliable performance on Nissan Altima, Juke, Maxima, and Sentra vehicles.