Dynamite Friction 830-67105L Disc Brake Rotor - Front Left

Front Left Drilled and Slotted Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-67105L, is a vented front left disc brake rotor built for vehicles that use a 320 mm brake disc with a 5-lug, 114.3 mm bolt circle. It combines a directional slotted X drilled surface with a rust resistant coating and a Geospec Silver Grey hat finish for a clean, service-ready appearance.

Compatible With Nissan Z, INFINITI Q50, Nissan Murano, INFINITI Q60, Nissan Pathfinder, INFINITI QX60, INFINITI QX50, and INFINITI JX35 front left applications, this rotor is sized for direct brake service on listed fitments. The 830-67105L is a practical choice when replacing a worn front rotor on select Nissan and INFINITI models.

Key Features

• Part number 830-67105L
• DFC Geoperformance Rotor - Drilled and Slotted
• Front left position
• Vented rotor construction
• Directional slotted X drilled brake surface
• Rust resistant coating
• Geospec Silver Grey hat finish
• 320 mm outside diameter
• 5 bolt holes with 114.3 mm bolt circle
• 68 mm center hole diameter
• Nominal thickness: 28 mm
• Discard thickness: 26 mm

Product Details

This DFC Geoperformance Rotor - Drilled and Slotted is engineered around the listed dimensions for consistent brake service on select Nissan and INFINITI platforms. The directional surface pattern supports even pad contact across the rotor face, while the vented design helps manage heat during repeated stops. The plain disc finish and coated hat help maintain a cleaner appearance in the wheel well.

Part number 830-67105L is listed for 2023-2025 Nissan Z front left, 2014-2024 INFINITI Q50 front left, 2015-2024 Nissan Murano front left, 2017-2022 INFINITI Q60 front left, 2013-2021 Nissan Pathfinder front left, 2014-2020 INFINITI QX60 front left, 2016-2017 INFINITI QX50 front left, and 2013 INFINITI JX35 front left. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Common Brake Service Issues

• Front rotor wear that has reached discard thickness
• Brake pulsation from uneven rotor surfaces
• Noise caused by worn or heat-affected rotors
• Corrosion on the rotor hat or exposed metal surfaces
• Reduced braking consistency on listed Nissan and INFINITI models

Installation Notes and Tips

Verify rotor dimensions, bolt pattern, center bore, and position before installation. This rotor is for front left applications only and is directional, so confirm the correct side and rotation orientation during brake service. Inspect pads, caliper condition, and hub surface before mounting the new rotor to help ensure proper brake contact and smooth operation.

Quality Assurance

Dynamite Friction supplies this rotor with a rust resistant coating and Geospec Silver Grey hat finish for added surface protection during normal brake service. Confirm all fitment details against the vehicle’s brake configuration, including dual piston front caliper notes where listed, before ordering.