Dynamite Friction 830-68015R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Geoperformance Rotor

The Dynamite Friction DFC Geoperformance Rotor - Drilled and Slotted (part number 830-68015R) is engineered for reliable braking performance on select Infiniti models. Designed with a vented, directional surface, this rotor enhances heat dissipation and braking consistency for vehicles like the Infiniti Q50 and FX50.

• Nominal thickness: 20 mm with a discard thickness of 18 mm
• Vented disc type with drilled and slotted surface
• Directional braking surface for optimized performance
• Rust resistant coating for extended durability
• Geospec silver grey hat finish
• Five bolt holes with a bolt circle diameter of 114.3 mm
• Outside diameter of 350 mm and overall height of 62 mm

Detailed Product Features and Specifications

This disc brake rotor features a vented design that improves airflow to reduce heat buildup during braking, which is critical for maintaining consistent stopping power. The drilled and slotted surface pattern helps evacuate gases, dust, and water, contributing to improved brake pad contact and reduced brake fade. The rotor’s directional surface is engineered to optimize braking efficiency when installed correctly. The hat section is finished in Geospec silver grey, providing corrosion resistance and a clean appearance, while the entire rotor benefits from a rust resistant coating to extend service life.

With a nominal thickness of 20 mm and a discard thickness of 18 mm, this rotor meets the specifications required for safe and effective braking. The 5-lug bolt pattern with a 114.3 mm bolt circle diameter ensures compatibility with various Infiniti models, including the FX50, M35h, M37, M56, Q50, Q60, Q70, Q70L, and QX70.

DFC Geoperformance Rotor - Drilled and Slotted Product Line

The DFC Geoperformance Rotor - Drilled and Slotted line by Dynamite Friction focuses on delivering rotors with enhanced heat dissipation and surface designs that improve braking response. This product line combines drilled holes and slots with vented rotor construction to address common braking challenges such as heat buildup and pad glazing. The directional surface design further supports consistent braking performance across a range of driving conditions.

Applications and Problem Solving

• Reduces brake fade during extended or aggressive braking
• Improves water and debris evacuation for wet weather braking
• Minimizes brake pad glazing and uneven wear
• Enhances heat dissipation to maintain rotor integrity
• Provides corrosion resistance for longer rotor life

Installation Notes and Tips

Ensure the rotor is installed with the directional surface facing the correct rotation direction for optimal performance. Verify that the rotor thickness is above the discard thickness of 18 mm before installation. Use proper torque specifications for the 5-lug bolt pattern with a 114.3 mm bolt circle diameter. Inspect brake pads and hardware during installation to maintain overall braking system integrity.

Quality Assurance and Warranty

Dynamite Friction manufactures the 830-68015R rotor to meet industry standards for fitment and performance on compatible Infiniti models. The rust resistant coating and precision machining contribute to consistent braking and durability. Warranty information is available through the manufacturer and should be reviewed prior to purchase.