Eagle Eye SR073-U000L Tail Light Housing - Left

Eagle Eye SR073-U000L Tail Light Housing

The Eagle Eye SR073-U000L is a left tail light housing complete assembly for select Subaru WRX and WRX STI applications. It is built with an ABS plastic housing and a red, clear PMA plastic lens for exterior rear lighting replacement.

• Left-side tail light housing complete assembly
• Housing material: ABS plastic
• Lens material: PMA plastic
• Lens color: red and clear
• Bulb type configuration: LED tail lamp and brake lamp, halogen W16W back-up lamp, halogen W5W rear side marker lamp, and halogen WY21W rear turn signal lamp
• Bulbs not included
• Hardware not included

Fitment and Application

Compatible with 2015-2021 Subaru WRX, left, includes lens. Compatible with 2015-2021 Subaru WRX STI, left, includes lens. This part number, SR073-U000L, is also referenced for the same application under OE and aftermarket cross references including 84912VA030 and SU2818106.

Detailed Product Information

This tail light housing is intended for rear exterior lighting replacement on Subaru WRX and Subaru WRX STI models. The assembly uses LED lighting for the tail lamp and brake lamp functions, with halogen bulb specifications listed for the back-up lamp, rear side marker lamp, and rear turn signal lamp. The red and clear lens design supports the original rear lamp appearance while the complete assembly format simplifies replacement of the housing and lens unit. If you are replacing a damaged left rear lamp on a Subaru WRX or Subaru WRX STI, SR073-U000L provides the correct side-specific housing configuration.

Common Reasons for Replacement

• Cracked or broken left rear lamp housing
• Clouded, damaged, or discolored lens
• Failed tail lamp, brake lamp, or turn signal lamp assembly
• Water intrusion at the rear lighting unit
• Restoring proper rear lighting appearance on a Subaru WRX or WRX STI

Installation Notes and Tips

Verify left-side fitment before installation and confirm bulb requirements against the vehicle’s existing lighting setup. Transfer or source the required bulbs separately, since bulbs are not included. Inspect the mounting points and connector condition before installing the new assembly, and test all rear lighting functions after installation.

Quality Assurance

Eagle Eye manufactures this tail light housing as a complete replacement assembly for the specified Subaru applications. Confirm part number SR073-U000L and vehicle fitment before ordering to ensure the correct left-side rear lamp assembly.