Elring 010.360 Engine Crankshaft Seal - Front

Elring Crankshaft Seal for Toyota Applications

The Elring 010.360 engine crankshaft seal is built for applications that require a precise radial shaft seal with a 35.0 mm inside diameter and 49.0 mm outside diameter. Made from ACM (polyacrylate) and featuring a dust lip, it is suited for timing-end sealing on many Toyota, Lexus, and Geo models.

Use this seal when servicing a leaking crankshaft area on vehicles such as the Toyota Corolla, Toyota Camry, and Toyota Supra. The Elring 010.360 is specified with a 6.0 mm thickness and AS radial shaft seal design for a direct-fit sealing solution.

Key Features

• Engine crankshaft seal for timing-end and front applications where listed
• ACM (polyacrylate) sealing material for engine oil resistance
• 35.0 mm inside diameter, 49.0 mm outside diameter, 6.0 mm thickness
• Dust lip helps reduce contamination at the sealing edge
• Radial shaft seal design: AS
• Swirl type: RD, right-hand twist
• Elring 010.360 part number for ordering and catalog lookup

Detailed Description

Elring 010.360 is an engine crankshaft seal used in the engine sealing system to retain oil at the crankshaft while helping keep dirt and debris out of the sealing area. Its ACM construction is commonly used in automotive oil seals for stable performance in engine environments, and the dust lip adds an extra barrier at the shaft interface. This seal is listed across a wide range of Toyota fitments, including Corolla, Camry, Celica, MR2, Tercel, Paseo, Supra, and Avanza, plus Lexus IS300 and Geo Prizm applications. This part cross-references Beck/Arnley 039-6339 and Victor Reinz 81-53247-00 for the same application.

Compatible With

• Fits 2007-2015 Toyota Avanza, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 2002-2005 Lexus IS300, N/A
• Fits 2004-2005 Toyota Yaris, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist; Timing End
• Fits 1998-2002 Toyota Corolla, N/A
• Fits 1992-1999 Toyota Paseo, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 1995-1999 Toyota Tercel, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist; Timing End
• Fits 1986-1998 Toyota Supra, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 1984-1997 Toyota Corolla, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 1991-1995 Toyota MR2, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 1990-1992 Geo Prizm, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 1989-1992 Toyota Cressida, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist
• Fits 1986-1991 Toyota Camry, N/A
• Fits 1985-1988 Chevrolet Nova, N/A. Width: 6mm; Inner Diameter: 35mm; Outer Diameter: 49mm; Dust Cover: with dust lip; Swirl Type: Right-hand Twist

What It Helps Fix

• Engine oil leaking from the crankshaft seal area
• Oil seepage at the timing end of the engine
• Contamination entering the crankshaft sealing surface
• Seal wear caused by age, heat, and shaft rotation
• Service issues on Toyota Corolla, Camry, and Supra engine sealing repairs

Installation Notes

Confirm the seal dimensions, swirl direction, and engine-side location before installation. Clean the crankshaft and housing surfaces thoroughly, and inspect the shaft for grooves or damage that could affect sealing performance. For Toyota Yaris, Paseo, and Tercel applications, verify whether the seal is used at the timing end or front position as listed in the fitment data.

Quality Assurance

Elring is a recognized OE-focused sealing brand, and this crankshaft seal is built to match the dimensional and design requirements listed for the application. Verify part number 010.360 against the vehicle’s engine code and seal location before installation.