/live/media/EL/EL_023950_Fro.jpg)
OE Quality
60-Day Returns
Elring 023.950 Engine Crankshaft Seal - Rear
Elring Crankshaft Seal for Ford Fiesta
Elring part 023.950 is an engine crankshaft seal built for sealing performance at the crankshaft interface. It uses PTFE material, a dust lip, and a supplied mounting sleeve to support accurate installation on covered Ford Fiesta applications.
- PTFE (polytetrafluoroethylene) sealing material
- Inside diameter: 79.33 mm
- Outside diameter: 131.3 mm
- Thickness: 19.0 mm
- Radial shaft seal design: IWD
- With dust lip for added sealing protection
- Includes mounting sleeve
- Swirl type: LD
Detailed Product Overview
This Elring crankshaft seal, part number 023.950, is specified for engine sealing service where crankshaft oil control is critical. The PTFE sealing surface is paired with a dust lip to help maintain a clean sealing area, while the mounting sleeve supports proper handling during installation. For Ford Fiesta owners searching for an engine crankshaft seal, Elring 023.950 provides the dimensional and design details needed for a precise replacement.
Compatible with Ford Fiesta applications including 2014 Ford Fiesta and 2003-2011 Ford Fiesta. This part cross-references 1 231 144 and 1 388 409 for the same application.
Common Problems This Part Addresses
- Engine oil leakage at the crankshaft seal area
- Contamination entering the seal lip area
- Wear-related sealing loss at the crankshaft interface
- Improper sealing after prior seal service
- Noise or residue associated with a deteriorated crankshaft seal
Installation Notes and Tips
Verify shaft diameter, seal orientation, and housing dimensions before installation. The included mounting sleeve should be used to protect the PTFE sealing lip during assembly, and the sealing surface should remain clean and free of debris. Confirm the application against the vehicle year and engine configuration before service on Ford Fiesta models.
Quality Assurance
Elring is known for engine sealing components used in professional repair environments. Part number 023.950 is manufactured to the listed dimensional and design specifications for crankshaft seal replacement service.
| Brand | Elring |
|---|---|
| Part Number | 023.950 |
| Material | Ptfe (polytetrafluoroethylene) |
| Inside Diameter | 79.33 |
| Thickness | 19.0 |
| Outside Diameter | 131.3 |
| Dust Cover | With dust lip |
| Radial Shaft Seal Design | Iwd |
| Supplementary Article/Info 2 | With mounting sleeve |
| Swirl Type | Ld |
This part fits 11 vehicles. Search below:
| Year | Make | Model | Submodel | Body Type | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 2014 | Ford | Fiesta | SE | Hatchback | FWD | 1.0L | L3 | N/A | |
| 2011 | Ford | Fiesta | S | Sedan | FWD | 1.6L | L4 | N/A | |
| 2010 | Ford | Fiesta | First | Sedan | FWD | 1.6L | L4 | N/A | |
| 2009 | Ford | Fiesta | First | Sedan | FWD | 1.6L | L4 | N/A | |
| 2008 | Ford | Fiesta | First | Sedan | FWD | 1.6L | L4 | N/A | |
| 2007 | Ford | Fiesta | First | Hatchback | FWD | 1.6L | L4 | N/A | |
| 2006 | Ford | Fiesta | First | Hatchback | FWD | 1.6L | L4 | N/A | |
| 2005 | Ford | Fiesta | First | Hatchback | FWD | 1.6L | L4 | N/A | |
| 2004 | Ford | Fiesta | First | Hatchback | FWD | 1.6L | L4 | N/A | |
| 2003 | Ford | Fiesta | First | Hatchback | FWD | 1.6L | L4 | N/A | |
| 2001 | Ford | Fiesta | Base | Hatchback | FWD | 1.6L | L4 | N/A |
* Always verify fitment with your vehicle's VIN if unsure. Submodel & trim restrictions may apply.
This part directly replaces or is cross-referenced with the following part numbers:
Cross-reference numbers are provided for identification purposes only. Always confirm fitment before ordering.