Elring 131.860 Manual Transmission Main Shaft Seal

Manual Transmission Main Shaft Seal for Volvo and Mini

Elring 131.860 is a manual transmission main shaft seal built with NBR (nitrile butadiene rubber) for sealing performance in the transmission case. It measures 23.0 mm inside diameter, 36.0 mm outside diameter, and 7.0 mm thickness, with a radial shaft seal design A and no dust lip.

Key Features

• Manual transmission main shaft seal for transmission sealing service
• 23.0 mm inside diameter, 36.0 mm outside diameter, 7.0 mm thickness
• NBR (nitrile butadiene rubber) construction for oil-resistant sealing
• Radial shaft seal design A
• Without dust lip
• Elring part number 131.860

Detailed Description

This Elring transmission seal is specified for manual gearbox main shaft sealing where the listed dimensions match the application. It is a direct-fit sealing component for select Volvo S60, Volvo V40, Volvo C30, and Mini Cooper models, and the part number 131.860 is also referenced in interchange listings for related applications. This part cross-references 07015547 and NA5449 for the same application.

Compatible With 2011-2015 Volvo S60, N/A; 2015 Volvo V40, N/A; 2011-2012 Volvo C30, N/A; and 2007-2013 Mini Cooper, N/A. For the Mini Cooper application, the listed notes specify 23 mm inner diameter, 36 mm outer diameter, and no dust lip.

Common Issues Addressed

• Transmission fluid seepage at the main shaft seal area
• Oil leakage from a worn or hardened shaft seal
• Contamination entering the transmission through a damaged seal
• Seal replacement during manual transmission service or rebuild work

Installation Notes and Tips

Verify the shaft diameter and seal dimensions before installation. Clean the seal bore and shaft surface thoroughly, and inspect for wear, scoring, or corrosion that could affect sealing performance. Install the seal squarely to avoid distortion, and confirm the radial shaft seal orientation matches the transmission design.

Quality Assurance

Elring is a recognized sealing-system manufacturer with OE-focused engineering for drivetrain applications. This seal is produced to match the listed dimensions and material specification for the confirmed vehicle applications.