Elring 267.830 Engine Cylinder Head Gasket

Elring 267.830 Cylinder Head Gasket for BMW Z3

Elring 267.830 is an engine cylinder head gasket built for the 1998-1999 BMW Z3. It uses a fibre composite gasket design with an 86 mm diameter and 1.74 mm thickness to match the specified sealing requirements for this application.

Key Features

• Engine cylinder head gasket for BMW Z3 fitment
• Part number 267.830 for direct reference and ordering
• Fibre composite gasket design
• 86 mm diameter
• 1.74 mm thickness
• Cross-reference: Gates 23980 for the same application

Detailed Description

Elring 267.830 is a cylinder head gasket for the 1998-1999 BMW Z3, engineered around the listed 86 mm bore diameter and 1.74 mm compressed thickness. The fibre composite construction is used in engine sealing systems where consistent head-to-block sealing is required under combustion pressure and thermal cycling. If you are sourcing a BMW Z3 head gasket, Elring 267.830 provides the specified dimensions needed for this engine application.

This part also references additional article 802.760, which should be checked during service planning to confirm the full sealing system requirements for the repair. Elring 267.830 is identified with several interchange numbers, including 11 12 1 708 585 and 30-028501-00, helping technicians and parts buyers match the correct cylinder head gasket for the BMW Z3.

What It Is Used For

• Replacing a leaking cylinder head gasket on a 1998-1999 BMW Z3
• Restoring combustion chamber sealing between the cylinder head and engine block
• Addressing coolant or oil leakage at the head gasket interface
• Correcting compression loss caused by gasket failure
• Supporting engine repair after overheating or head service

Installation Notes and Tips

Verify the engine bore diameter, gasket thickness, and required companion article 802.760 before installation. Clean the mating surfaces thoroughly, inspect the cylinder head and block for warpage, and follow the manufacturer’s torque sequence and tightening specifications during assembly. Confirm the vehicle application as Fits 1998-1999 BMW Z3 before ordering or beginning repair.

Quality Assurance

Elring is a recognized name in engine sealing systems, and this gasket is specified with exact dimensional data to support accurate parts matching for the BMW Z3 application. Use the listed part number 267.830 and interchange references to confirm selection against the original service requirements.