Elring 507.822 Engine Crankshaft Seal - Rear

Elring Crankshaft Seal for Rear Engine Service

Elring 507.822 is an engine crankshaft seal built for rear sealing applications where oil control and shaft sealing accuracy matter. It uses FPM (fluoride rubber) and ACM (polyacrylate rubber) materials, along with a dust lip, to support sealing performance in demanding engine and transmission-end locations.

Compatible With select Nissan Platina and Toyota Tercel/Toyota Van applications, this seal matches the listed dimensions and radial shaft seal design for direct replacement service. The Elring 507.822 part number is also referenced in cross-application catalogs for related OE-style sealing needs.

Key Features

• Engine crankshaft seal for rear sealing locations
• FPM and ACM construction for sealing durability
• 80.0 mm inside diameter, 100.0 mm outside diameter, 8.0 mm thickness
• Dust lip helps reduce contamination at the seal edge
• ASW radial shaft seal design with LD swirl type
• Fits rear and transmission-end applications listed for Nissan Platina, Toyota Tercel, and Toyota Van

Detailed Description

Elring 507.822 is a rear crankshaft seal engineered around the listed OE-style dimensions and sealing profile. The FPM/ACM material blend is selected for engine sealing environments where heat, oil exposure, and long-term flexibility are important. With an 80 mm inner diameter, 100 mm outer diameter, and 8 mm thickness, this seal is specified for the rear of the engine or transmission end on the listed vehicles. This part cross-references CSF 10542 for the same application.

Vehicle coverage includes 2002-2006 Nissan Platina rear, 2007-2010 Nissan Platina rear, 1987-1994 Toyota Tercel rear, 1984-1989 Toyota Van rear, and additional listed Tercel and Platina configurations. If you are sourcing an Elring crankshaft seal for a Nissan Platina or Toyota Tercel rear seal repair, verify the dimensions and seal design against the original part before installation.

What It Helps Address

• Rear main seal oil leakage
• Oil seepage at the transmission end
• Contamination entering the crankshaft sealing area
• Wear-related sealing loss from age and heat cycling
• Replacement of a damaged or hardened crankshaft seal

Installation Notes and Tips

Confirm the seal dimensions, swirl direction, and radial shaft seal design before installation. Inspect the crankshaft sealing surface for grooves, scoring, or contamination, and clean the housing thoroughly before pressing the seal into place. For Nissan Platina and Toyota Tercel rear applications, match the position and notes in the fitment data to the vehicle configuration being serviced.

Quality Assurance

Elring is known for engine sealing components used in professional repair environments. Part number 507.822 is built to the listed specifications for dimensional accuracy and sealing consistency in rear crankshaft seal applications.

Fitment

• Fits 2007-2010 Nissan Platina, rear. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist.
• Fits 2007-2010 Nissan Platina, N/A. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist.
• Fits 2002-2006 Nissan Platina, rear. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist; Transmission End.
• Fits 1991-1994 Toyota Tercel, rear. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist; Transmission End.
• Fits 1987-1988 Toyota Tercel, rear. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist; Transmission End.
• Fits 1987-1994 Toyota Tercel, N/A. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist.
• Fits 1987-1990 Toyota Tercel, rear. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist.
• Fits 1984-1989 Toyota Van, rear. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist; Transmission End.
• Fits 1984-1989 Toyota Van, N/A. Notes: Width: 8mm; Inner Diameter: 80mm; Outer Diameter: 100mm; Dust Cover: with dust lip; Swirl Type: Left-hand Twist.
• Fits 1986 Toyota Tercel, N/A. Notes: