/live/media/EL/EL_878940_Ang.jpg)
Elring 878.940 Engine Oil Drain Plug
| Brand | Elring 878.940 |
|---|---|
| Bolt Head-/Nut Design | Male Hex |
| Spanner Size | 14 mm |
| Supplementary Article/Info 2 | with seal ring |
| Thread Size | M 14x1,5x19 |
| Fits | Suzuki · 24 vehicles |
Seal ring included. Helps provide a secure, leak-resistant oil drain plug seal.
Male hex design. Allows easy tightening with a standard 14 mm tool.
M14x1.5 thread. A direct-fit oil drain plug for compatible engine hardware.
Cross-references 47 11 491, 95 507 357 and 11128-4A00B for the same application. See all 7.
Elring 878.940 Engine Oil Drain Plug
Elring 878.940 is an engine oil drain plug built for secure oil pan service on select Suzuki applications. It features a male hex head, 14 mm spanner size, and an M14 x 1.5 x 19 thread specification, with a seal ring for proper sealing at the drain point.
Key Features
- Brand: Elring
- Part number: 878.940
- Engine oil drain plug for engine hardware service
- Male hex bolt head design
- 14 mm spanner size
- M14 x 1.5 x 19 thread size
- Includes seal ring
Product Details
This Elring drain plug is specified for Suzuki oil pan drain service where an M14 x 1.5 thread and 19 mm length are required. It is listed for Suzuki Fronx 2024-2025, Suzuki Swift 2012-2015 and 2017-2023, Suzuki Baleno 2021, Suzuki Grand Vitara 2009 and 2013, Suzuki SX4 2007-2009 and 2010-2013, and Suzuki SX4 Crossover 2012. The part number 878.940 is also referenced for OE-style replacement needs across these applications.
This part cross-references 47 11 491 and 95 507 357 for the same application.
Common Uses
- Replacing a worn or damaged oil drain plug
- Restoring proper sealing at the oil pan drain opening
- Addressing stripped or rounded drain plug head hardware
- Servicing oil leaks at the drain point caused by seal wear
- Maintaining correct thread engagement during oil changes
Installation Notes
Verify thread size, pitch, and length before installation. The drain plug uses a male hex head and 14 mm spanner size, so use the correct tool to avoid rounding the head. Confirm the seal ring seats properly and tighten to the vehicle manufacturer’s specified torque. For fitment, match the application to your Suzuki Fronx, Swift, Baleno, Grand Vitara, SX4, or SX4 Crossover by model year and thread specification.
Quality Assurance
Elring is an established name in engine sealing and hardware components, and this drain plug is built to the listed dimensional specifications for accurate service replacement. Part number 878.940 is identified for the confirmed Suzuki applications shown above.
| Year | Make | Model | Submodel | Body Type | Drive Type | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| 2025 | Suzuki | Fronx | Booster Green | Sport Utility | FWD | 1.5L | L4 | — | N/A | — |
| 2024 | Suzuki | Fronx | Booster Green | Sport Utility | FWD | 1.5L | L4 | — | N/A | — |
| 2023 | Suzuki | Swift | — | — | — | 1.2L | L4 | GAS | N/A | — |
| 2022 | Suzuki | Swift | — | — | — | 1.2L | L4 | GAS | N/A | — |
| 2021 | Suzuki | Baleno | GLS | Hatchback | FWD | 1.4L | L4 | — | N/A | — |
| 2021 | Suzuki | Swift | — | — | — | 1.2L | L4 | GAS | N/A | — |
| 2020 | Suzuki | Swift | — | — | — | 1.2L | L4 | GAS | N/A | — |
| 2019 | Suzuki | Swift | — | — | — | 1.2L | L4 | GAS | N/A | — |
| 2018 | Suzuki | Swift | — | — | — | 1.2L | L4 | GAS | N/A | — |
| 2017 | Suzuki | Swift | Edicion Especial | Hatchback | FWD | 1.4L | L4 | — | N/A | — |
| 2015 | Suzuki | Swift | GA | Hatchback | FWD | 1.4L | L4 | — | N/A | — |
| 2014 | Suzuki | Swift | GA | Hatchback | FWD | 1.4L | L4 | — | N/A | — |
| 2013 | Suzuki | Grand Vitara | — | — | — | 2.4L | L4 | — | N/A | Length: 19mm; Thread Size: M14; Thread Pitch: 1.5mm; Bolt Head Nut Design: Male Hex |
| 2013 | Suzuki | Swift | GA | Hatchback | FWD | 1.4L | L4 | — | N/A | — |
| 2013 | Suzuki | SX4 | — | — | — | 2.0L | L4 | GAS | N/A | — |
| 2012 | Suzuki | Swift | GL | Hatchback | FWD | 1.4L | L4 | — | N/A | — |
| 2012 | Suzuki | SX4 | — | — | — | 2.0L | L4 | GAS | N/A | — |
| 2012 | Suzuki | SX4 Crossover | — | — | — | 2.0L | L4 | GAS | N/A | — |
| 2011 | Suzuki | SX4 | — | — | — | 2.0L | L4 | GAS | N/A | — |
| 2010 | Suzuki | SX4 | — | — | — | 2.0L | L4 | GAS | N/A | — |
| 2009 | Suzuki | Grand Vitara | — | — | — | 2.4L | L4 | — | N/A | Length: 19mm; Thread Size: M14; Thread Pitch: 1.5mm; Bolt Head Nut Design: Male Hex |
| 2009 | Suzuki | SX4 | — | — | — | 2.0L | L4 | — | N/A | Length: 19mm; Thread Size: M14; Thread Pitch: 1.5mm; Bolt Head Nut Design: Male Hex |
| 2008 | Suzuki | SX4 | — | — | — | 2.0L | L4 | — | N/A | Length: 19mm; Thread Size: M14; Thread Pitch: 1.5mm; Bolt Head Nut Design: Male Hex |
| 2007 | Suzuki | SX4 | — | — | — | 2.0L | L4 | — | N/A | Length: 19mm; Thread Size: M14; Thread Pitch: 1.5mm; Bolt Head Nut Design: Male Hex |
| No rows match your filter. | ||||||||||