/live/media/EL/EL_942220_Fro.jpg)
Elring 942.220 Fuel Injection Throttle Body Mounting Gasket
| Brand | Elring 942.220 |
|---|---|
| Material | Fpm (fluoride rubber) |
| Fits | Land Rover · 16 vehicles |
Throttle body gasket. Seals the fuel injection throttle body for a secure mounting surface.
FPM material. Fluoride rubber resists fuel and heat exposure.
Cross-references LWF500020 for the same application. See all 1.
Elring 942.220 Throttle Body Gasket
Elring 942.220 is a fuel injection throttle body mounting gasket made from FPM (fluoride rubber) for sealing the throttle body to the intake tract. It is built for Land Rover LR3 and Range Rover applications where a precise seal is needed to maintain stable airflow and reduce vacuum leaks.
Key Features
- FPM (fluoride rubber) construction for fuel- and heat-resistant sealing performance
- Fuel injection throttle body mounting gasket for intake system service
- Direct-fit sealing solution for Land Rover LR3 and Range Rover models
- Elring 942.220 for service work on the throttle body mounting surface
- This part cross-references LWF500020 for the same application
Detailed Description
Use Elring 942.220 when replacing a worn or flattened throttle body gasket on Land Rover LR3, Range Rover, and Range Rover Sport vehicles. The FPM material is selected for sealing in fuel-system and intake-area environments, helping maintain a consistent seal between the throttle body and mounting flange. If you are searching for a Land Rover LR3 throttle body mounting gasket or a Range Rover throttle body gasket, Elring 942.220 is the correct service part for the listed applications.
What It Is Used For
- Air leaks at the throttle body mounting surface
- Rough idle caused by intake sealing loss
- Vacuum leak conditions after throttle body service
- Replacement of a compressed or damaged throttle body gasket
- Restoring a proper seal on Land Rover LR3 and Range Rover intake systems
Installation Notes and Tips
Clean the throttle body and intake mating surfaces before installation. Inspect the flange for residue, warping, or damage that could affect sealing. Verify the gasket seats evenly during reassembly and confirm the correct application by part number 942.220 before installation.
Quality Assurance
Elring is known for sealing-system components used in automotive service applications. Part number 942.220 is specified as an FPM throttle body mounting gasket for the listed Land Rover fitments, including 2003-2005 Range Rover, 2005-2009 LR3, 2006-2009 Range Rover Sport, and 2007-2009 Range Rover.
| Year | Make | Model | Submodel | Body Type | Drive Type | Liters | Cylinders | Fuel Type | Notes |
|---|---|---|---|---|---|---|---|---|---|
| 2009 | Land Rover | LR3 | — | — | — | 4.4L | V8 | GAS | — |
| 2009 | Land Rover | Range Rover | — | — | — | 4.4L | V8 | GAS | — |
| 2009 | Land Rover | Range Rover Sport | — | — | — | 4.4L | V8 | GAS | — |
| 2008 | Land Rover | LR3 | — | — | — | 4.4L | V8 | GAS | — |
| 2008 | Land Rover | Range Rover | — | — | — | 4.4L | V8 | GAS | — |
| 2008 | Land Rover | Range Rover Sport | — | — | — | 4.4L | V8 | GAS | — |
| 2007 | Land Rover | LR3 | — | — | — | 4.4L | V8 | GAS | — |
| 2007 | Land Rover | Range Rover | — | — | — | 4.4L | V8 | GAS | — |
| 2007 | Land Rover | Range Rover Sport | — | — | — | 4.4L | V8 | GAS | — |
| 2006 | Land Rover | LR3 | — | — | — | 4.4L | V8 | GAS | — |
| 2006 | Land Rover | Range Rover | — | — | — | 4.4L | V8 | GAS | From Chassis 6A000001 |
| 2006 | Land Rover | Range Rover Sport | — | — | — | 4.4L | V8 | GAS | — |
| 2005 | Land Rover | LR3 | — | — | — | 4.4L | V8 | GAS | — |
| 2005 | Land Rover | Range Rover | HSE | Sport Utility | 4WD | 4.4L | V8 | — | — |
| 2004 | Land Rover | Range Rover | HSE | Sport Utility | 4WD | 4.4L | V8 | — | — |
| 2003 | Land Rover | Range Rover | HSE | Sport Utility | 4WD | 4.4L | V8 | — | — |
| No rows match your filter. | |||||||||