FAG SS2434 Automatic Transmission Output Shaft Seal - Front, Left or Rear

Automatic Transmission Output Shaft Seal

FAG SS2434 is an automatic transmission output shaft seal built with nitrile sealing material, a rubber body, spring tension, and an auxiliary lip for controlled sealing at the shaft interface. It is engineered for specific Toyota applications, including Toyota RAV4, Celica, MR2, Camry, Pickup, and 4Runner models across multiple years.

Key Features

• Part number SS2434 for direct catalog lookup
• Nitrile sealing material for transmission sealing applications
• Rubber seal construction with spring and auxiliary lip
• Bore diameter: 2.48 in. / 62.992 mm
• Seal outside diameter: 2.493 in. / 63.322 mm
• Seal width: 1.378 in. / 35.001 mm
• Cross-references National 710138 and SKF 13858 for the same application

Detailed Description

FAG SS2434 is a transmission output shaft seal designed around precise dimensional requirements for Toyota driveline applications. The seal uses nitrile sealing material with a rubber body, spring, and auxiliary lip to help maintain a consistent seal at the output shaft area. With a 2.48-inch bore diameter, 2.493-inch outside diameter, and 1.378-inch width, this seal is sized for specific OE-style replacement needs on Toyota RAV4, Celica, MR2, Camry, Pickup, and 4Runner vehicles. The part number SS2434 is also associated with interchange references such as National 710138 and SKF 13858.

Vehicle Fitment

• Fits 1998-2000 Toyota RAV4, left, A247E Trans Mfg Code; Schaeffler Seal Global Number 413 2434 100
• Fits 1996-1997 Toyota Celica, left, Schaeffler Seal Global Number 413 2434 100
• Fits 1988-1997 Toyota Celica, rear, Schaeffler Seal Global Number 413 2434 100
• Fits 1991-1995 Toyota MR2, left, Schaeffler Seal Global Number 413 2434 100
• Fits 1988-1989 Toyota MR2, left, Schaeffler Seal Global Number 413 2434 100
• Fits 1988-1991 Toyota Camry, rear, Schaeffler Seal Global Number 413 2434 100
• Fits 1988-1989 Toyota MR2, left, 4AGZE DOHC; Schaeffler Seal Global Number 413 2434 100
• Fits 1988-1989 Toyota MR2, left, 4AGELC DOHC; Schaeffler Seal Global Number 413 2434 100
• Fits 1979-1989 Toyota Pickup, front, Schaeffler Seal Global Number 413 2434 100
• Fits 1984-1988 Toyota 4Runner, front, Schaeffler Seal Global Number 413 2434 100
• Fits 1988 Toyota MR2, left, To 11/01/1987; Schaeffler Seal Global Number 413 2434 100
• Fits 1972-1974 Toyota Pickup, front, 4WD; Schaeffler Seal Global Number 413 2434 100

Common Uses

• Replacing a leaking automatic transmission output shaft seal
• Addressing transmission fluid seepage at the shaft exit point
• Restoring sealing performance on Toyota driveline assemblies
• Reducing contamination entry from dirt, dust, and moisture at the seal area
• Helping maintain lubricant retention around the output shaft

Installation Notes

Verify the bore diameter, outside diameter, and width against the removed seal before installation. Confirm the vehicle year, model, transmission code, and position listed in the fitment data, especially on Toyota MR2, Celica, Camry, Pickup, and 4Runner applications. Clean the sealing bore and shaft surface thoroughly before installing SS2434 to help achieve proper seating and sealing.

Quality Assurance

FAG sources sealing components to meet vehicle-specific specifications and uses materials selected for demanding wheel-end and sealing applications. SS2434 is built to the listed dimensions and material specification for consistent fitment on the confirmed Toyota applications.