FAG SS2929 Wheel Seal - Front

Wheel Seal for Front Applications

FAG SS2929 is a front wheel seal built for specific GM compact and midsize applications, including Chevrolet Cavalier, Pontiac Sunfire, Buick Skylark, and related models. It is engineered to help keep wheel end grease in place while blocking dirt, dust, and moisture from entering the bearing area.

• Metal seal design with auxiliary lip for added sealing support
• Nitrile sealing material for wheel end service conditions
• Bore diameter: 2.903 in. / 73.736 mm
• Seal outside diameter: 2.907 in. / 73.838 mm
• Seal width: 1.875 in. / 47.625 mm
• Fits front wheel end applications across 1982-2005 model years

Fitment Coverage

• Fits 1985-2005 Chevrolet Cavalier, front
• Fits 1995-2005 Pontiac Sunfire, front
• Fits 1988-1998 Buick Skylark, front
• Fits 1995-1998 Pontiac Grand Am, front
• Fits 1987-1996 Chevrolet Corsica, front
• Fits 1992-1996 Oldsmobile Achieva, front
• Fits 1985-1994 Pontiac Grand Am, front, w/12mm hole in mounting flange
• Fits 1986-1994 Pontiac Sunbird, front, w/12mm hole in mounting flange
• Fits 1988-1991 Oldsmobile Cutlass Calais, front
• Fits 1985-1989 Buick Skyhawk, front
• Fits 1984-1988 Cadillac Cimarron, front, 2nd design, w/12mm hole in mounting flange
• Fits 1985-1988 Oldsmobile Firenza, front
• Fits 1985-1987 Oldsmobile Calais, front
• Fits 1984-1985 Pontiac J2000 Sunbird, front, 12mm hole in mounting flange
• Fits 1984 Buick Skyhawk, front, w/2nd design and 12mm hole in mounting flange
• Fits 1982-1984 Cadillac Cimarron, front, 1st design, w/10mm hole in mounting flange
• Fits 1984 Chevrolet Cavalier, front, 2nd design, w/12mm hole in mounting flange
• Fits 1982-1984 Chevrolet Cavalier, front, 1st design, w/10mm hole in mounting flange
• Fits 1984 Oldsmobile Firenza, front, 2nd design, w/12mm hole in mounting flange
• Fits 1982-1984 Oldsmobile Firenza, front, 1st design, w/10mm hole in mounting flange
• Fits 1984 Pontiac J2000 Sunbird, front, 10mm hole in mounting flange
• Fits 1982-1983 Buick Skyhawk, front, w/1st design and 10mm hole in mounting flange
• Fits 1982-1983 Pontiac J2000, front, w/10mm hole in mounting flange

Detailed Description

FAG SS2929 is a precision wheel seal designed to match vehicle-specific wheel end requirements and help maintain bearing cleanliness and lubrication. The metal construction with an auxiliary lip and nitrile sealing material is selected to support sealing performance at the hub, where contamination control is critical. This part number is used in front applications on Chevrolet Cavalier, Pontiac Sunfire, Buick Skylark, Pontiac Grand Am, and other listed GM platforms.

This part cross-references Monroe Shocks & Struts (e.g., 5697) for the same application.

What This Wheel Seal Helps Address

• Grease loss at the wheel end
• Dirt and dust intrusion into the bearing area
• Moisture entering the hub assembly
• Seal wear from incorrect size or profile selection
• Front wheel end service on listed GM vehicles

Installation Notes and Tips

Verify the bore diameter, outside diameter, and seal width against the original seal before installation. Confirm the mounting flange hole size and design revision noted in the fitment list, especially on 1982-1984 and 1984-1985 applications where first- and second-design parts are listed. Clean the hub and bearing surfaces thoroughly and inspect for scoring or damage before installing the new seal.

Quality Assurance

FAG wheel seals are built from manufacturer-specific specifications using quality-controlled materials sourced to meet application requirements. The SS2929 is engineered to support wheel end protection against contamination and lubricant loss in the listed front applications.