FAG WR0127 Wheel Bearing Retaining Ring - Front

Wheel Bearing Retaining Ring for Front Applications

The FAG WR0127 wheel bearing retaining ring is a precision driveline hardware component used to secure the wheel bearing assembly in place. With an inside diameter of 0.238 in (6.05 mm), an outside diameter of 3.116 in (79.15 mm), and a width of 0.098 in (2.5 mm), it is built to match the dimensional requirements of the listed front-wheel applications.

Compatible with select Hyundai Accent, Hyundai Elantra, Hyundai Tiburon, Kia Rio, Kia Rio5, Dodge Attitude, and Dodge Verna front applications, this retaining ring supports accurate bearing retention during service work. Part number WR0127 is also referenced in OE-style replacement catalogs for the same application.

Key Features

• Wheel bearing retaining ring for driveline and axle service
• Inside diameter: 0.238 in / 6.05 mm
• Outside diameter: 3.116 in / 79.15 mm
• Width: 0.098 in / 2.5 mm
• Front application coverage for multiple Hyundai, Kia, and Dodge models
• FAG chassis hardware component for professional repair use

Detailed Description

FAG WR0127 is a wheel bearing retaining ring used in front hub and bearing service where secure retention is required. FAG supplies chassis-related hardware components such as retaining clips, ABS cables, and bolts to support professional repair procedures, and this part follows that same service-focused approach. The dimensional specifications help ensure the ring matches the bearing assembly requirements on listed vehicles, including 1997-2000 Hyundai Elantra, 1998-2001 Hyundai Tiburon, 2000-2011 Hyundai Accent, 2004-2006 Dodge Verna, 2006-2011 Kia Rio, 2006-2011 Kia Rio5, and 2006-2014 Dodge Attitude, all front position.

This part number, WR0127, is a direct reference point for technicians and parts buyers looking for a front wheel bearing retaining ring for Hyundai Accent and Kia Rio service, as well as related Dodge Attitude and Dodge Verna applications.

This part cross-references SKF CIRC178 and Timken RET178 for the same application.

What It Helps Address

• Loose or improperly retained wheel bearing assemblies
• Front hub service requiring a replacement retaining ring
• Dimensional mismatch during bearing installation
• Wear-related service on Hyundai, Kia, and Dodge front driveline components
• Restoration of proper bearing retention after disassembly

Installation Notes and Tips

Verify the inside diameter, outside diameter, and width against the original retaining ring before installation. Confirm front-position application and match the vehicle listing exactly, especially on Hyundai Accent, Hyundai Elantra, and Kia Rio service jobs. Clean the mating area thoroughly so the ring seats correctly and inspect the bearing assembly for wear or damage before reassembly.

Quality Assurance

FAG is a recognized chassis and driveline component supplier, and WR0127 is manufactured to support professional repair standards with application-specific dimensions for the listed vehicles. Part number WR0127 is intended for front wheel bearing retention on the confirmed fitments shown above.