FAG WR0316 Wheel Bearing Retaining Ring - Front

Wheel Bearing Retaining Ring for Front Applications

The FAG WR0316 wheel bearing retaining ring is a precision hardware component used to secure the wheel bearing assembly in place. With an inside diameter of 3.14 in. (79.76 mm), an outside diameter of 3.606 in. (91.6 mm), and a width of 0.236 in. (6 mm), it matches the dimensional requirements for select front driveline applications.

Compatible With 2010-2016 Lexus RX350 front, 2010-2016 Lexus RX450h front, and 2008-2009 Toyota Highlander front applications, this retaining ring supports proper bearing retention during service on these vehicles. The FAG WR0316 is also cross-referenced to SKF CIR212 for the same application.

Key Features

• Wheel bearing retaining ring for front axle service
• Inside diameter: 3.14 in. / 79.76 mm
• Outside diameter: 3.606 in. / 91.6 mm
• Width: 0.236 in. / 6 mm
• OE-style hardware from FAG chassis components
• Fits select Lexus RX350, Lexus RX450h, and Toyota Highlander front applications
• Part number: WR0316

Detailed Description

FAG WR0316 is a wheel bearing retaining ring built for front driveline and axle hardware applications where accurate bearing retention is required. FAG supplies chassis repair components such as retaining clips, ABS cables, and bolts, and this part follows that same service-focused approach for professional repair work. The dimensional specifications are important for proper seating and retention, especially on vehicles like the Lexus RX350, Lexus RX450h, and Toyota Highlander.

Use WR0316 when servicing front wheel bearing assemblies on the listed applications. The part number WR0316 appears in service and interchange references for technicians and parts buyers looking for the correct retaining ring by dimension and vehicle fitment.

What This Part Helps Address

• Loose or missing wheel bearing retaining hardware
• Improper bearing retention during front hub service
• Noise or movement caused by worn or incorrect retaining rings
• Fitment issues when replacing front bearing hardware on Lexus RX350, Lexus RX450h, or Toyota Highlander models
• Service delays caused by using the wrong retaining ring size

Installation Notes and Tips

Confirm the inside diameter, outside diameter, and width before installation to match the original hardware. Inspect the bearing seat and surrounding components for wear, corrosion, or damage before installing the new ring. For best results, install WR0316 during front wheel bearing service on the specified Lexus and Toyota applications and verify proper seating after assembly.

Quality Assurance

FAG is a recognized chassis and driveline component supplier, and this retaining ring is produced to support professional repair standards for front wheel bearing service. Part number WR0316 is built to meet the dimensional requirements listed above for the confirmed applications.