Fel-Pro 61316 Fuel Injection Throttle Body Mounting Gasket

Fel-Pro 61316 Throttle Body Gasket

Fel-Pro 61316 is a premium fuel injection throttle body mounting gasket built for a precise seal between the throttle body and intake manifold. Made from paper material with a 0.023 in. (0.5 mm) thickness, it supports accurate sealing on applications that require a 4-bolt pattern and a 2.450 in. (62.2 mm) inside diameter.

Compatible With 1999-2003 Acura TL, 2001-2003 Acura CL, and 1999-2001 Honda Odyssey, this gasket is a direct-fit sealing solution for the listed applications. The Fel-Pro 61316 part number is also useful when cross-checking replacement options during intake and throttle body service.

Key Features

• Fuel injection throttle body mounting gasket for intake sealing service
• Paper construction with premium grade material selection
• 0.023 in. / 0.5 mm thickness for application-specific fit
• 2.450 in. / 62.2 mm inside diameter
• 4-bolt hole pattern for the listed vehicles
• Outside diameter: 4.256 x 3.539 in.
• Fel-Pro 61316 for Acura TL, Acura CL, and Honda Odyssey applications

Detailed Description

Fel-Pro 61316 is engineered as a throttle body mounting gasket for air and fuel delivery service where a stable seal is critical. Fel-Pro focuses on vehicle-specific sealing materials, and this gasket follows that approach with a premium paper construction sized for the listed fitments. For 1999-2003 Acura TL, 2001-2003 Acura CL, and 1999-2001 Honda Odyssey applications, the gasket dimensions and 4-bolt layout support proper alignment at the throttle body mounting surface. If you are replacing a worn throttle body gasket on an Acura TL, Acura CL, or Honda Odyssey, Fel-Pro 61316 provides the correct sealing profile for the specified applications.

This part cross-references Fel-Pro 35524 and MAHLE G31898 for the same application.

What It Helps Address

• Air leaks at the throttle body mounting surface
• Vacuum leaks caused by a flattened or damaged gasket
• Rough idle related to intake sealing loss
• Throttle body service issues after removal and reinstallation
• Unstable air metering from a compromised seal

Installation Notes and Tips

Clean both mating surfaces before installation and remove old gasket material completely. Verify the 4-bolt pattern, inside diameter, and throttle body opening match the application before assembly. Tighten fasteners evenly to maintain a uniform seal, and inspect the intake area after service for any signs of leakage. Fel-Pro 61316 should be matched to the exact vehicle listing for Acura TL, Acura CL, and Honda Odyssey fitment.

Quality Assurance

Fel-Pro gaskets are built around application-specific sealing materials and vehicle-focused fitment to support dependable sealing performance in professional repair work.