/live/media/FS/FS_33333_Fro.jpg)
Four Seasons 33333 A/C Receiver Drier
| Brand | Four Seasons 33333 |
|---|---|
| Body Diameter | 2.500 |
| Body Length | 8.000 |
| Bracket? | w/o Bracket |
| Connector B Type | Male Flare |
| Connector Type | Male Flare |
| Description | Filter Driers |
| Desiccant | Yes |
| Desiccant Replaceable | Not Replaceable |
| Dia. MM | 69.850 |
| Fuse Plug | No |
| Gasket / Seals? | Included |
| In Line Filter Material | Desiccant |
| In Line Filter Outlet Fitting Type | Male |
| Inlet Filter Fitting Thread Diameter | 0.625 |
| Inlet Filter Fitting Type | Male |
| Inlet Fitting Diameter | 0.375 |
| Inlet Fitting Type | Flare Fitting |
| Inlet Fraction | 3/8 |
| Inlet IN | 0.375 |
| Inlet MM | 9.525 |
| Length MM | 254.000 |
| Material | Steel |
| Meets / Exceeds OEM? | Yes |
| Moisture Indicator Window | No |
| Mounting Bracket Included | Not Included |
| New or Reman | New |
| O-Ring A Number/Desc | [35758] / Switch |
| O-Ring B Number/Desc | [24606] / Green O-Ring |
| Outlet Fitting Type | Flare Fitting |
| Outlet Fraction | 3/8 |
| Outlet IN | 0.375 |
| Outlet MM | 9.525 |
| Overall Depth IN | 8.000 |
| P. R. V.? | No |
| Service Port? | w/o Service Port |
| Sight Glass? | No |
| Stud? | No |
| Style | Steel Filter Drier |
| Switch Port? | w/ Switch Port |
| Type | Washer Not Included |
| Product line | Filter Drier |
| Fits | Audi |
OE-spec replacement. Meets or exceeds OEM requirements for dependable service.
Steel construction. Durable body with male flare fittings for a secure connection.
Built-in desiccant. Helps remove moisture from the A/C system.
Cross-references Four Seasons 33333, Gates 7334 and Global Parts Distributors LLC 1411368 for the same application. See all 35.
Four Seasons 33333 Filter Drier Overview
Four Seasons 33333 is a steel A/C receiver drier built for HVAC systems that use a male flare inlet and outlet with a 3/8 in. connection size. This filter drier includes desiccant, gasket/seals, and a switch port, and it meets or exceeds OEM requirements for direct replacement service.
For technicians servicing air conditioning systems on vehicles such as the Mercedes-Benz 190E and related applications, this Four Seasons filter drier supports moisture control and refrigerant cleanliness in the A/C circuit. The Four Seasons 33333 part number is also referenced in cross applications where OE-style receiver drier service is required.
Key Features
- Steel filter drier construction
- Male flare inlet and outlet fittings
- 3/8 in. inlet and outlet diameter
- Desiccant included for moisture absorption
- Switch port included
- Gasket/seals included
- Meets or exceeds OEM specifications
- New, non-remanufactured part
Product Details
This receiver drier is part of Four Seasons’ Filter Drier line, a product line focused on A/C system filtration and moisture removal. The unit measures 8.000 in. long with a 2.500 in. body diameter and uses a steel body for standard HVAC service applications. It is supplied without a mounting bracket, service port, sight glass, or moisture indicator window, and the desiccant is not replaceable.
Part number 33333 is a practical choice when replacing a worn or contaminated A/C receiver drier on Mercedes-Benz 190E applications and other OE-matched vehicles that use the same configuration. This part cross-references Gates 7334 for the same application.
What This Part Helps Address
- Moisture in the air conditioning system
- Contaminated refrigerant flow
- Reduced A/C cooling performance from a saturated drier
- Service issues related to a failed receiver drier
- Replacement needs for OE-style flare fitting systems
Installation Notes and Tips
Verify inlet and outlet fitting style, thread diameter, and overall dimensions before installation. Replace the receiver drier whenever the A/C system has been opened for major service, compressor replacement, or contamination cleanup. Confirm the switch port and seal locations match the vehicle’s original setup, and evacuate the system before recharging refrigerant.
Quality Assurance
Four Seasons 33333 is a new steel filter drier that meets or exceeds OEM requirements for service replacement. The part number 33333 is built for direct-fit HVAC repair where the original receiver drier specification calls for a male flare, 3/8 in. configuration.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||