/live/media/FS/FS_33712_Fro.jpg)
Four Seasons 33712 A/C Receiver Drier
| Brand | Four Seasons 33712 |
|---|---|
| Material | Aluminum |
| Inlet Filter Fitting Type | Female |
| Desiccant | Yes |
| In Line Filter Material | Desiccant |
| In Line Filter Outlet Fitting Type | P-nut |
| Pad Mount | W/o pad mount |
| Type | Washer not included |
| Body Diameter | 3.000 |
| Body Length | 6.500 |
| Moisture Indicator Window | No |
| Desiccant Replaceable | Not replaceable |
| Fuse Plug | No |
| Inlet Fitting Diameter | 0.375 |
| Outlet Fitting Type | P-nut fitting |
| Mounting Bracket Included | Not included |
| Bracket? | W/o bracket |
| Connector B Type | P-nut |
| Connector Type | Female o-ring |
| Description | Filter driers |
| Dia. MM | 76.000 |
| Gasket / Seals? | Included |
| Length MM | 165.000 |
| Meets / Exceeds OEM? | Yes |
| New or Reman | New |
| O-Ring A Number/Desc | [24241] / sealing washer kit |
| O-Ring A Quantity | 1 |
| O-Ring B Number/Desc | [24606] / green o-ring |
| O-Ring B Quantity | 1 |
| Outlet IN | 0.375 |
| Overall Depth IN | 6.500 |
| Fits | — |
OE-quality replacement. Meets or exceeds OEM standards for dependable system service.
Aluminum construction. Lightweight body resists corrosion in demanding HVAC use.
Desiccant filter drier. Helps remove moisture and protect the A/C system.
Cross-references Four Seasons 33712, Standard Ignition 7416 and UAC RD10999C for the same application. See all 30.
Four Seasons 33712 A/C Receiver Drier
Four Seasons 33712 is an aluminum A/C receiver drier built for HVAC systems that need moisture control and refrigerant filtration. This Filter Drier line is a direct-fit style replacement for select applications, including Ford F-150 and Chevrolet Silverado service needs where the receiver drier is part of the air conditioning circuit.
Key Features
- Aluminum receiver drier construction
- Female O-ring inlet connection with P-nut outlet fitting
- Desiccant included to absorb moisture in the A/C system
- New unit that meets or exceeds OEM requirements
- Washer not included; gasket/seals included
- No service port, sight glass, switch port, or fuse plug
- Stud-mounted style without pad mount or bracket
- Dimensions: 3.000 in. body diameter and 6.500 in. body length
Product Details
The Four Seasons Filter Drier line is built for HVAC service where clean refrigerant flow and moisture removal are critical. Part number 33712 uses a replaceable-style aluminum housing with a non-replaceable desiccant core, female O-ring connector design, and P-nut outlet fitting for the specified application. This receiver drier is a practical OE-style replacement for A/C repair work on vehicles such as Ford F-150 and Chevrolet Silverado, especially when restoring system performance after compressor service or line replacement. This part cross-references Standard Ignition 7416 and UAC RD10999C for the same application.
Common Problems This Part Addresses
- Moisture contamination inside the A/C system
- Reduced cooling performance from restricted refrigerant flow
- Debris capture after compressor or line failure
- Leak concerns at worn O-ring connection points
- Service issues caused by an aging receiver drier assembly
Installation Notes and Tips
Replace the receiver drier whenever the A/C system has been opened for service, especially after compressor replacement or major refrigerant loss. Inspect mating surfaces, replace seals as required, and verify the female O-ring and P-nut connections are clean before assembly. Confirm the vehicle uses the correct stud-mounted, w/o pad mount configuration and match the inlet and outlet sizes before installation. After installation, evacuate and recharge the system according to factory service procedures.
Quality Assurance
Four Seasons 33712 is a new part that meets or exceeds OEM specifications for the listed application. The aluminum construction and included desiccant support proper A/C system service and restoration.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||