/live/media/FS/FS_33732_Fro.jpg)
Four Seasons 33732 A/C Receiver Drier
| Brand | Four Seasons 33732 |
|---|---|
| Material | Aluminum |
| Inlet Filter Fitting Type | Female |
| Desiccant | Yes |
| In Line Filter Material | Desiccant |
| In Line Filter Outlet Fitting Type | P-nut |
| Pad Mount | W/o pad mount |
| Type | Washer not included |
| Body Diameter | 3.000 |
| Body Length | 6.000 |
| Moisture Indicator Window | No |
| Desiccant Replaceable | Not replaceable |
| Fuse Plug | No |
| Inlet Fitting Diameter | 0.375 |
| Outlet Fitting Type | P-nut fitting |
| Mounting Bracket Included | Not included |
| Bracket? | W/o bracket |
| Connector B Type | P-nut |
| Connector Type | Female o-ring |
| Description | Filter driers |
| Dia. MM | 76.000 |
| Gasket / Seals? | Included |
| Length MM | 152.400 |
| Meets / Exceeds OEM? | Yes |
| New or Reman | New |
| O-Ring A Number/Desc | [24242] / tear drop sealing washer |
| O-Ring A Quantity | 1 |
| O-Ring B Number/Desc | [24606] / green o-ring |
| O-Ring B Quantity | 1 |
| Outlet IN | 0.375 |
| Overall Depth IN | 6.000 |
| Fits | — |
OE direct replacement. Meets or exceeds OEM requirements for dependable system service.
Aluminum construction. Lightweight body resists corrosion in demanding HVAC use.
Desiccant filter drier. Helps remove moisture and contaminants from the system.
Cross-references Four Seasons 33732, Gates 7417 and MAHLE T33732 for the same application. See all 30.
Four Seasons 33732 A/C Receiver Drier
Four Seasons 33732 is an aluminum A/C receiver drier built for HVAC systems that need clean, dry refrigerant flow. This Filter Drier line part uses a female O-ring inlet and P-nut outlet fitting, with included seals and no pad mount, service port, or sight glass.
Key Features
- Aluminum body with a 3.000-inch diameter and 6.000-inch length
- Female O-ring connector type with 0.375-inch inlet and outlet fittings
- Desiccant included to help remove moisture from the A/C system
- New, OE-style replacement that meets or exceeds OEM requirements
- Includes gasket/seals; washer not included
- No moisture indicator window, fuse plug, service port, switch port, or sight glass
- Four Seasons 33732 cross-references Gates 7417 for the same application
Product Details
The Four Seasons Filter Drier line is focused on replacement HVAC components that match common OE mounting and connection styles. Part number 33732 is an aluminum filter drier with a replaceable-desiccant design not offered here, so it is supplied as a new, sealed unit with desiccant already in place. It uses a female O-ring inlet, P-nut outlet fitting, and included sealing components for a direct-service replacement in systems that call for this configuration. This part number 33732 is also referenced under MAHLE T33732 and UAC RD11019C.
Common A/C Problems It Can Help Address
- Moisture contamination in the refrigerant circuit
- Reduced cooling performance caused by restricted flow
- Debris buildup in the A/C line after component service
- Seal leakage at the receiver drier connection points
- System contamination after compressor or line replacement
Installation Notes
Verify the inlet and outlet fitting style, body dimensions, and mounting layout before installation. This receiver drier is an aluminum filter drier without a pad mount or bracket, so it should be matched to the original equipment configuration on the vehicle. Replace the sealing washers and O-rings during service, evacuate the system properly, and recharge with the correct refrigerant and oil specification. For vehicle-specific searches, use Four Seasons 33732 when checking A/C receiver drier replacement for select Honda Civic and Toyota Camry applications.
Quality Assurance
Four Seasons lists this part as meeting or exceeding OEM requirements. It is a new replacement component built for HVAC service where moisture control and proper refrigerant flow are critical.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||