/live/media/ZO/ZO_18034_Top.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Gates 18034 HVAC Heater Hose - Heater To Engine
| Brand | Gates 18034 |
|---|---|
| Position | Heater To Engine |
| Material | Epdm |
| End 1 Inside Diameter | .63 |
| End 1 Inside Diameter | 16 |
| End 2 Inside Diameter | .63 |
| End 2 Inside Diameter | 16 |
| Centerline Length | 16.9 |
| Centerline Length | 429 |
| Branch Quantity | 0 |
| 9839 | Yes |
| 9845 | 0 |
| Centerline Length (in) | 16.9 |
| Centerline Length (mm) | 429 |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Heater Hose |
| Fits | Toyota · 2 vehicles |
Factory-molded OEM style. Fits like the original hose for a clean, direct replacement.
EPDM construction. Resists heat and coolant for dependable service.
Versatile hose. Suitable for coolant, water, air, and marine use.
Cross-references Baldwin 18034, 11999 and 14559S for the same application. See all 4.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Gates Molded Heater Hose for Toyota Tundra
The Gates Molded Heater Hose, part number 18034, is a factory-molded coolant hose built for tight engine bays and OE-style routing. It is made from EPDM and is approved for coolant, water, air, and marine applications.
Compatible with 2005-2006 Toyota Tundra heater-to-engine routing, this molded heater hose supports a precise fit where straight hose sections are not practical. Gates 18034 is a direct-fit style replacement for applications that require a small I.D. molded hose with the correct centerline shape.
Key Features
- Factory-molded, OE-style hose for compact engine compartments
- EPDM construction for coolant, water, and air service
- Small inside diameter: 0.63 in. / 16 mm at both ends
- Centerline length: 16.9 in. / 429 mm
- Compatible with marine applications
- Gates 18034 molded heater hose for Toyota Tundra service
Detailed Description
Gates Molded Heater Hose 18034 is engineered as a shaped replacement hose for heater and coolant routing where the original path requires a molded bend. The EPDM material is suited for thermal cycling and fluid transfer in automotive HVAC and cooling-system use. For 2005-2006 Toyota Tundra models, this hose matches the heater-to-engine position and helps maintain the intended hose path in tighter engine compartments. This part cross-references Baldwin 18034 for the same application.
Common Issues This Part Can Address
- Cracked or hardened heater hose material
- Coolant seepage at a worn hose section
- Poor hose routing caused by a collapsed or misshaped line
- Restricted heater coolant flow from an aging hose
- Replacement needs for a molded heater-to-engine hose on Toyota Tundra
Installation Notes and Tips
Verify hose routing against the original part before installation. Confirm both end diameters and the centerline length match the vehicle’s heater-to-engine layout. Inspect adjoining clamps, fittings, and connection points for wear or corrosion before installing Gates 18034. After installation, refill and bleed the cooling system according to the vehicle service procedure and check for leaks at operating temperature.
Quality Assurance
Gates is known for producing OE-style molded hoses that follow factory routing requirements. Part number 18034 is built to support accurate fitment for the listed Toyota Tundra applications and is suitable for coolant, water, air, and marine use.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2006 | Toyota | Tundra | 4.0L | V6 | GAS | Heater To Engine | Molded Heater Hose |
| 2005 | Toyota | Tundra | 4.0L | V6 | GAS | Heater To Engine | Molded Heater Hose |
| No rows match your filter. | |||||||