/live/media/ZO/ZO_19160_Fro.jpg)
Gates 19160 HVAC Heater Hose - Valve To Pipe-1
| Brand | Gates 19160 |
|---|---|
| Position | Valve To Pipe-1 |
| 0 | |
| Yes | |
| Branch Quantity | 0 |
| Centerline Length | 24.2 |
| Centerline Length | 615 |
| Centerline Length (in) | 24.2 |
| Centerline Length (mm) | 615 |
| End 1 Inside Diameter | .63 |
| End 1 Inside Diameter | 16 |
| End 2 Inside Diameter | .71 |
| End 2 Inside Diameter | 18 |
| Material | EPDM |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Heater Hose |
| Fits | Toyota · 5 vehicles |
OEM-style molded hose. Factory-molded for a precise fit and clean routing.
EPDM construction. Handles coolant, water, and air applications.
Marine approved. Suitable for marine use as well as HVAC service.
Cross-references BBB Industries 11160, Dayco 87822 and Gates 19160 for the same application. See all 7.
Gates 19160 Molded Heater Hose Overview
The Gates 19160 molded heater hose is an OEM-style coolant hose built for tight engine bays where a formed routing path matters. It is made from EPDM and is approved for coolant, water, air, and marine applications, making it a practical replacement for service on the Toyota Tundra heater circuit.
Key Features
- Factory-molded design for a precise hose route in compact engine compartments
- EPDM construction for use in coolant, water, and air service
- Small I.D. molded coolant hose for formed HVAC and heater routing
- End inside diameters: 16 mm (.63 in) and 18 mm (.71 in)
- Centerline length: 615 mm (24.2 in)
- Compatible with 2000-2004 Toyota Tundra, Valve To Pipe-1
Detailed Description
Gates Molded Heater Hose 19160 is shaped to follow the original hose path in applications where straight hose sections will not maintain the correct bend or clearance. The molded EPDM construction supports heater and coolant transfer in the Toyota Tundra, especially in the Valve To Pipe-1 location where routing accuracy is important. This part cross-references Dayco 87822 for the same application.
For buyers searching for a 2000-2004 Toyota Tundra molded heater hose, Gates 19160 provides the formed profile and OE-style fit needed for a direct service replacement. It is also a relevant choice for coolant hose replacement searches, heater hose routing repair, and molded hose service in smaller engine compartments.
What It Is Used For
- Replacing a leaking or cracked heater hose in the Toyota Tundra
- Restoring proper coolant flow through the heater circuit
- Correcting hose routing where a molded shape is required
- Addressing heat-related hose hardening or splitting
- Servicing a Valve To Pipe-1 hose connection with the proper formed profile
Installation Notes and Tips
Verify hose routing, end diameters, and centerline length before installation. Match the molded shape to the original path on the vehicle and inspect adjoining pipes, clamps, and fittings for wear or corrosion before reassembly. Confirm the application against the vehicle’s heater hose layout for 2000-2004 Toyota Tundra models.
Quality Assurance
Gates manufactures this molded heater hose as an OE-style replacement part for formed coolant and heater applications. The EPDM material and factory-molded construction are selected to support consistent fitment in demanding underhood environments.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2004 | Toyota | Tundra | 3.4L | V6 | GAS | Valve To Pipe-1 | Molded Heater Hose |
| 2003 | Toyota | Tundra | 3.4L | V6 | GAS | Valve To Pipe-1 | Molded Heater Hose |
| 2002 | Toyota | Tundra | 3.4L | V6 | GAS | Valve To Pipe-1 | Molded Heater Hose |
| 2001 | Toyota | Tundra | 3.4L | V6 | GAS | Valve To Pipe-1 | Molded Heater Hose |
| 2000 | Toyota | Tundra | 3.4L | V6 | GAS | Valve To Pipe-1 | Molded Heater Hose |
| No rows match your filter. | |||||||