/live/media/ZO/ZO_19188_Fro.jpg)
Gates 19188 HVAC Heater Hose - Heater To Pipe-1
| Brand | Gates 19188 |
|---|---|
| Position | Heater To Pipe-1 |
| 0 | |
| Yes | |
| Branch Quantity | 0 |
| Centerline Length | 12.8 |
| Centerline Length | 325 |
| Centerline Length (in) | 12.8 |
| Centerline Length (mm) | 325 |
| End 1 Inside Diameter | .63 |
| End 1 Inside Diameter | 16 |
| End 2 Inside Diameter | .75 |
| End 2 Inside Diameter | 19 |
| Material | EPDM |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Heater Hose |
| Fits | Nissan · 9 vehicles |
OEM-style molded hose. Factory-molded for a precise, ready-to-fit replacement.
EPDM construction. Resists heat and coolant for dependable hose performance.
Suitable for coolant, water, air, and marine applications.
Cross-references BBB Industries 11188, Davico Mfg 19188 and 14247S for the same application. See all 5.
Gates Molded Heater Hose 19188 Overview
Gates 19188 is a molded HVAC heater hose built for tight engine bays where a straight hose will not route correctly. This OEM-style coolant hose uses EPDM construction and a factory-molded shape to support coolant, water, and air transfer in the heater circuit.
Compatible With 1995-1999 Nissan Sentra and 1995-1998 Nissan 200SX, Heater To Pipe-1. The molded profile helps maintain the correct routing in compact Nissan engine compartments, and the hose is approved for marine applications as well.
Key Features
- Gates Molded Heater Hose line for OE-style routing
- Part number 19188 for direct reference and catalog lookup
- EPDM material for coolant, water, and air service
- Factory-molded shape for smaller, tighter-fitting engine compartments
- End I.D. sizes: 16 mm (.63 in) and 19 mm (.75 in)
- Centerline length: 325 mm (12.8 in)
Product Details
This Gates molded coolant hose is shaped to follow the original hose path in applications where clearance is limited. It is a practical replacement for heater hose routing on Nissan Sentra and Nissan 200SX models listed above, and the molded design supports a clean fit at the heater-to-pipe connection. Part number 19188 is also referenced by Davico Mfg 19188 and BBB Industries 11188 for the same application.
Common Problems It Can Address
- Cracked or hardened heater hose material
- Coolant leaks at a worn hose bend or connection point
- Poor hose routing in a compact engine bay
- Restricted heater circuit flow from a deteriorated hose
- Replacement needs for a molded heater hose on Nissan Sentra or 200SX
Installation Notes
Verify hose routing, end diameters, and centerline length before installation. This hose is listed for Heater To Pipe-1 applications on 1995-1999 Nissan Sentra and 1995-1998 Nissan 200SX, and the notes specify that a protective sleeve is required. Confirm the original path and surrounding clearance so the molded shape seats correctly.
Quality Assurance
Gates is a recognized supplier of molded coolant and heater hose products, and this hose follows an OEM-style form for accurate routing in the specified vehicles. The EPDM construction and molded design support dependable service in heater, coolant, water, and air applications.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1999 | Nissan | Sentra | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1998 | Nissan | 200SX | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1998 | Nissan | Sentra | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1997 | Nissan | 200SX | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1997 | Nissan | Sentra | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1996 | Nissan | 200SX | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1996 | Nissan | Sentra | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1995 | Nissan | 200SX | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| 1995 | Nissan | Sentra | 1.6L | L4 | GAS | Heater To Pipe-1 | Protective sleeve required; Molded Heater Hose |
| No rows match your filter. | |||||||