/live/media/ZO/ZO_19313_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Gates 19313 HVAC Heater Hose - Engine To Heater
| Brand | Gates 19313 |
|---|---|
| Position | Engine To Heater |
| Material | Epdm |
| End 1 Inside Diameter | .63 |
| End 1 Inside Diameter | 16 |
| End 2 Inside Diameter | .63 |
| End 2 Inside Diameter | 16 |
| Centerline Length | 13.8 |
| Centerline Length | 351 |
| Branch Quantity | 0 |
| 9839 | Yes |
| 9845 | 0 |
| Centerline Length (in) | 13.8 |
| Centerline Length (mm) | 351 |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Heater Hose |
| Fits | Pontiac · 6 vehicles |
OEM-style molded hose. Factory-molded for a precise fit in tight spaces.
EPDM construction. Resists coolant, water, and air applications.
Approved for marine use.
Cross-references BBB Industries 11313, Gates 19313 and 14395S for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Gates 19313 Molded Heater Hose Overview
The Gates 19313 molded heater hose is an OEM-style coolant hose formed for tight engine bays and direct routing between the engine and heater circuit. It is built from EPDM and sized with 16 mm (0.63 in) inside diameter ends for a precise fit in the specified application.
Compatible with 2003-2008 Pontiac Vibe engine-to-heater routing, this molded heater hose follows the factory-style shape needed for clean hose routing in compact spaces. The Gates Molded Heater Hose line focuses on formed replacement hoses for vehicles where straight hose stock will not match the original path.
Key Features
- Part number: 19313
- Gates Molded Heater Hose line for factory-style replacement routing
- EPDM construction for coolant, water, and air service
- Factory-molded shape for smaller, tighter engine compartments
- End 1 inside diameter: 0.63 in / 16 mm
- End 2 inside diameter: 0.63 in / 16 mm
- Centerline length: 13.8 in / 351 mm
- Approved for marine applications
Product Details
Gates 19313 is a molded heater hose built to match the routing needs of compact engine compartments where a formed hose is required. The EPDM construction is suited for coolant transfer and related fluid or air applications, while the molded profile helps maintain the original hose path. This part cross-references BBB Industries 11313 for the same application.
Fits 2003-2008 Pontiac Vibe, engine to heater. For Pontiac Vibe heater hose replacement work, this formed hose supports a direct-style repair where the original hose follows a molded path rather than a straight run.
Common Repair Uses
- Replacing a cracked or heat-aged heater hose
- Restoring coolant flow between the engine and heater circuit
- Correcting hose routing in a tight engine compartment
- Addressing leaks at a molded hose section
- Replacing a hose that no longer holds its original shape
Installation Notes
Verify hose routing, end diameters, and centerline length before installation. Compare the molded shape to the original Pontiac Vibe hose path to confirm engine-to-heater alignment. Inspect adjoining fittings, clamps, and nearby coolant components for wear before completing the repair.
Quality Assurance
Gates manufactures this molded heater hose as an OEM-style replacement part for the listed application. Part number 19313 is built to the dimensional and material requirements shown above for direct-fit service in the specified vehicle range.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2008 | Pontiac | Vibe | 1.8L | L4 | GAS | Engine To Heater | Molded Heater Hose |
| 2007 | Pontiac | Vibe | 1.8L | L4 | GAS | Engine To Heater | Molded Heater Hose |
| 2006 | Pontiac | Vibe | 1.8L | L4 | GAS | Engine To Heater | Molded Heater Hose |
| 2005 | Pontiac | Vibe | 1.8L | L4 | GAS | Engine To Heater | Molded Heater Hose |
| 2004 | Pontiac | Vibe | 1.8L | L4 | GAS | Engine To Heater | Molded Heater Hose |
| 2003 | Pontiac | Vibe | 1.8L | L4 | GAS | Engine To Heater | Molded Heater Hose |
| No rows match your filter. | |||||||