/live/media/ZO/ZO_19659_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Gates 19659 HVAC Heater Hose - Sensor To Dual-Pipe Cooling Assembly or Tee To Intake Manifold (Inlet)
| Brand | Gates 19659 |
|---|---|
| Position | Tee To Intake Manifold (Inlet) and Sensor To Dual-Pipe Cooling Assembly |
| Material | Epdm |
| End 1 Inside Diameter | .72 |
| End 1 Inside Diameter | 18 |
| End 2 Inside Diameter | .72 |
| End 2 Inside Diameter | 18 |
| Centerline Length | 12.7 |
| Centerline Length | 323 |
| Branch Quantity | 0 |
| 9839 | Yes |
| 9845 | 0 |
| Centerline Length (in) | 12.7 |
| Centerline Length (mm) | 323 |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Heater Hose |
| Fits | Mercury, Nissan, and Tesla · 17 vehicles |
OEM-style shape. Factory-molded routing helps match compact hose paths.
EPDM construction. Built for coolant, water, air, and marine service.
Small inside diameter design suits tight hose connections.
Cross-references Gates 19659, 11659 and 16167M for the same application. See all 6.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
Gates 19659 is a molded heater hose built for tight engine compartments and small-diameter coolant routing. It uses EPDM construction and an OEM-style molded shape to match the routing needs shown in the fitment data.
Compatible With Tesla S cooling assembly applications and Mercury Villager or Nissan Quest auxiliary heater routing, this hose is a direct-fit style replacement for specific molded coolant paths. The Gates 19659 part number is also referenced as 19659 for ordering and catalog lookup.
Key Features
- EPDM construction for coolant, water, and air service
- Factory-molded shape for compact routing
- Small inside diameter design for tight hose connections
- OEM-style replacement hose from Gates
- Approved for marine applications
Detailed Description
The Gates Molded Heater Hose line focuses on formed hoses that follow the routing required in confined engine bays. Part number 19659 is a molded coolant hose with a 12.7 in. centerline length and 0.72 in. inside diameter at both ends, making it suitable for applications that need a shaped hose rather than a straight universal length. In fitment terms, it fits 2012-2015 Tesla S, Sensor To Dual-Pipe Cooling Assembly, and 1993-1998 Mercury Villager or Nissan Quest, Tee To Intake Manifold (Inlet), with auxiliary heater routing. The Gates 19659 designation appears in interchange listings for catalog matching.
This part cross-references Monroe Shocks & Struts (e.g., 11659, 16167M) for the same application.
What It Is Used For
- Replacing a molded heater hose with the correct formed routing
- Restoring coolant flow through a small-diameter hose path
- Addressing leaks at aged or cracked hose sections
- Matching auxiliary heater or cooling assembly hose layouts
Installation Notes
Verify hose routing, end diameters, and centerline length before installation. Confirm the application notes for the exact cooling or heater connection point, especially on Tesla S and auxiliary heater configurations. Use the molded shape to follow the original hose path without forcing bends.
Quality Assurance
Gates supplies this hose as an OEM-style molded replacement built for modern compact engine compartments. EPDM construction supports coolant service in demanding underhood environments.
| Year | Make | Model | Drive Type | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|---|
| 2016 | Tesla | S | RWD | -L | -- | ELECTRIC | Sensor To Dual-Pipe Cooling Assembly | Mar. 31, 2016 & Older; Molded Heater Hose |
| 2015 | Tesla | S | — | -L | -- | ELECTRIC | Sensor To Dual-Pipe Cooling Assembly | Molded Heater Hose |
| 2014 | Tesla | S | — | -L | -- | ELECTRIC | Sensor To Dual-Pipe Cooling Assembly | Molded Heater Hose |
| 2013 | Tesla | S | — | -L | -- | ELECTRIC | Sensor To Dual-Pipe Cooling Assembly | Molded Heater Hose |
| 2012 | Tesla | S | — | -L | -- | ELECTRIC | Sensor To Dual-Pipe Cooling Assembly | Molded Heater Hose |
| 1998 | Mercury | Villager | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1998 | Nissan | Quest | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1997 | Mercury | Villager | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1997 | Nissan | Quest | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1996 | Mercury | Villager | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1996 | Nissan | Quest | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1995 | Mercury | Villager | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1995 | Nissan | Quest | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1994 | Mercury | Villager | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1994 | Nissan | Quest | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1993 | Mercury | Villager | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| 1993 | Nissan | Quest | — | 3.0L | V6 | GAS | Tee To Intake Manifold (Inlet) | With Auxiliary Heater; Molded Heater Hose |
| No rows match your filter. | ||||||||