/live/media/ZO/ZO_19891_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Gates 19891 HVAC Heater Hose - Heater Outlet or Tee-1 To Tee-2
| Brand | Gates 19891 |
|---|---|
| Position | Tee-1 To Tee-2 |
| 0 | |
| Yes | |
| Branch Quantity | 0 |
| Centerline Length | 20.2 |
| Centerline Length | 513 |
| Centerline Length (in) | 20.2 |
| Centerline Length (mm) | 513 |
| End 1 Inside Diameter | .74 |
| End 1 Inside Diameter | 19 |
| End 2 Inside Diameter | .62 |
| End 2 Inside Diameter | 16 |
| Material | EPDM |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Heater Hose |
| Fits | Volkswagen and Honda · 11 vehicles |
OEM-style molded hose. Factory-molded for a precise, ready-to-fit replacement.
EPDM construction. Resists heat and wear in coolant, water, air, and marine use.
Small I.D. design fits tighter engine compartments.
Cross-references Gates 19891, Quality-Built 11891 and 5QE819337G for the same application. See all 5.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Gates 19891 Molded Heater Hose Overview
The Gates 19891 molded heater hose is a factory-shaped coolant hose built for tight engine bays where a straight hose will not route correctly. Made from EPDM, it supports coolant, water, and air transfer and is also approved for marine applications.
Compatible With 2010-2012 Honda Accord heater outlet and 2012-2015 Honda Crosstour heater outlet, this molded hose follows the OE-style path needed for a clean, secure replacement. It also fits 2016-2019 Volkswagen e-Golf Tee-1 to Tee-2 applications.
Key Features
- Gates Molded Heater Hose, part number 19891
- Factory-molded shape for smaller, tighter engine compartments
- EPDM construction for coolant, water, and air service
- End I.D. sizes: 19 mm (.74 in) and 16 mm (.62 in)
- Centerline length: 513 mm (20.2 in)
- OEM-style routing for heater and coolant connections
- Approved for marine applications
Product Details
Gates 19891 is a molded coolant hose designed to match the routing demands of modern vehicles with compact engine layouts. The pre-formed shape helps maintain proper hose alignment at the heater outlet or between tee connections, reducing the need to force a universal hose into place. For Honda Accord, Honda Crosstour, and Volkswagen e-Golf applications, the molded profile supports a direct replacement approach based on the listed fitment.
This part cross-references Quality-Built 11891 for the same application.
Common Problems This Hose Can Address
- Cracked or aged heater hose material
- Incorrect hose routing in tight engine compartments
- Coolant seepage at worn hose connections
- Restricted fitment when a straight hose does not match OE routing
- Service replacement for heater outlet or tee-to-tee hose runs
Installation Notes and Tips
Verify the end diameters and centerline length against the original hose before installation. Confirm the vehicle application and hose position, especially on 2010-2012 Honda Accord, 2012-2015 Honda Crosstour, and 2016-2019 Volkswagen e-Golf models. Inspect adjoining clamps, fittings, and connection points for wear or corrosion before transferring the hose into service.
Quality Assurance
Gates manufactures this molded heater hose as an OE-style replacement part with application-specific shaping and EPDM construction for demanding underhood conditions.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2019 | Volkswagen | e-Golf | -L | -- | ELECTRIC | Tee-1 To Tee-2 | Molded Heater Hose |
| 2018 | Volkswagen | e-Golf | -L | -- | ELECTRIC | Tee-1 To Tee-2 | Molded Heater Hose |
| 2017 | Volkswagen | e-Golf | -L | -- | ELECTRIC | Tee-1 To Tee-2 | Molded Heater Hose |
| 2016 | Volkswagen | e-Golf | -L | -- | ELECTRIC | Tee-1 To Tee-2 | Molded Heater Hose |
| 2015 | Honda | Crosstour | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| 2014 | Honda | Crosstour | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| 2013 | Honda | Crosstour | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| 2012 | Honda | Accord | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| 2012 | Honda | Crosstour | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| 2011 | Honda | Accord | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| 2010 | Honda | Accord | 2.4L | L4 | GAS | Heater Outlet | Molded Heater Hose |
| No rows match your filter. | |||||||