/live/media/ZO/ZO_19G3982_Fro.jpg)
Gates 19G3982 Automatic Continuously Variable Transmission (CVT) Belt - Drive Belt
| Brand | Gates 19G3982 |
|---|---|
| Position | Drive Belt |
| Top Width | 1.188 |
| Top Width | 30 |
| Construction | Double notched |
| Color | Black |
| Cord Material | Aramid |
| Cross Section Designation | Rvs-r |
| Outside Circumference | 1041 |
| Outside Circumference | 41 |
| Type | Power sport cvt belt |
| Belt Material | Chloroprene |
| Angle | 26 |
| 9837 | Yes |
| Angle | 26 |
| Belt Material | Chloroprene |
| Color | Black |
| Construction | Double notched |
| Cord Material | Aramid |
| Fabric Bottom | Yes |
| Notched | Yes |
| OE Comparison Rating | Oe performance |
| Outside Circumference (in) | 41 |
| Outside Circumference (mm) | 1041 |
| Section | Rvs-r |
| Top Width (in) | 1.188 |
| Top Width (mm) | 30 |
| Type | Power sport cvt belt |
| Fits | — |
OE performance rating. Built to match original-equipment expectations.
Double-notched construction. Improves flexibility and helps the belt run smoothly.
Aramid cord material. Adds strength for demanding CVT use.
Cross-references Dayco HPX2239, Dayco XTX2239 and Gates 19C3982 for the same application. See all 9.
Gates G-Force CVT Belt Overview
The Gates G-Force WorkHorse CVT belt is built for powersport and utility CVT systems that see demanding use on trails and job sites. Part number 19G3982 is engineered for vehicles with engines under 800cc and is sized for OE-style replacement in the correct application.
For buyers searching for a Gates CVT belt for ATV, UTV, or side-by-side service, this belt combines aramid cord reinforcement with a double-notched construction to support consistent belt tracking under load. It is a direct-fit style option for the specified CVT application and is also referenced by 19C3982 and 19R3982 in Gates interchange listings.
Key Features
- Gates G-Force WorkHorse CVT belt for powersport automatic continuously variable transmissions
- Part number 19G3982
- Optimized for vehicles with engines less than 800cc
- Double-notched construction for CVT operation
- Aramid cord material for added reinforcement
- Chloroprene belt material with black finish
- OE performance rating
- 1.188 in. top width, 41 in. outside circumference
- RVS-R section and 26-degree angle
Product Details
The Gates G-Force WorkHorse line focuses on CVT belt service where heat, load, and repeated throttle changes place extra demand on the drive system. This 19G3982 belt uses a double-notched, fabric-bottom design with aramid cords and chloroprene construction to match the needs of many powersport CVT drivetrains. If you are replacing a worn CVT belt on an ATV, UTV, or similar vehicle, this part number 19G3982 is built around OE-style dimensions and performance targets.
Search terms such as Gates 19G3982 CVT belt, powersport CVT belt replacement, and OE performance CVT belt for ATV or UTV all point to the same type of service part. It is also cross-referenced in Gates listings with 19C3982 and 19R3982 for the same application.
What It Helps Address
- Belt slip during acceleration
- Loss of drive response from a worn CVT belt
- Noise or vibration from belt wear
- Inconsistent CVT engagement under load
- Reduced performance caused by belt stretch or glazing
Installation Notes and Tips
Verify the belt dimensions, section, and CVT system requirements before installation. Confirm the 1.188-inch top width and 41-inch outside circumference match the original specification for your application. Inspect the clutch faces, pulleys, and sheaves for wear or contamination before installing the new belt, and follow the vehicle manufacturer’s service procedure for belt break-in and tension checks.
Compatible With the correct ATV, UTV, or side-by-side application using the Gates G-Force CVT belt specification. Fits are not listed in the provided data, so vehicle-specific confirmation is required before purchase.
Quality Assurance
Gates supplies drivetrain components with OE-focused engineering standards, and the G-Force WorkHorse belt line is built around performance requirements for demanding powersport use. Part number 19G3982 is specified as an OE performance replacement belt for the intended CVT application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||