/live/media/ZO/ZO_25VX600_Fro.jpg)
Gates 2/5VX600 Accessory Drive Belt - Hub and Fan or Hydraulic Pump - Left
| Brand | Gates 2/5VX600 |
|---|---|
| Position | Hub and Fan and Hydraulic Pump - Left |
| Top Width | 1.25 |
| Top Width | 32 |
| Construction | Notched |
| Cord Material | Polyester |
| Cross Section Designation | 5vx |
| Strand Quantity | 2 |
| Top Width Per Strand | .62 |
| Top Width Per Strand | 16 |
| Outside Circumference | 1524 |
| Outside Circumference | 60 |
| Type | Narrow section molded notch joined v-belt |
| Belt Material | Ethylene elastomer (ee) |
| 9837 | Yes |
| Belt Material | Ethylene elastomer (ee) |
| Contruction | Notched |
| Cord Material | Polyester |
| Notched | Yes |
| Number of Strands | 2 |
| Section | 5vx |
| Top Width Per Strand (in) | .62 |
| Top Width Per Strand (mm) | 16 |
| Type | Narrow section molded notch joined v-belt |
| Fits | — |
Joined V-belt design. Multiple strands work together for steadier power transfer and even load distribution.
Notched construction. Improves flex for smoother operation in demanding accessory drives.
Polyester cord reinforcement. Adds strength and helps the belt hold its shape under load.
Cross-references Gates 2/5VX600, 012580 and A-5VX600/02 for the same application. See all 6.
Gates 2/5VX600 PowerBand V-Belt Overview
The Gates 2/5VX600 is a Narrow Section Molded Notch Joined V-Belt built for accessory drive systems that need stable tracking and even load distribution. It uses a joined PowerBand construction to help reduce belt vibration and keep the drive running in line under load.
For vehicle owners and technicians searching for a Gates 2/5VX600 accessory drive belt for industrial and automotive belt drive applications, this belt combines narrow 5VX section geometry with a molded notched profile for consistent flex. It is a practical choice when a single belt setup is prone to turning over or walking off the pulley.
Key Features
- Brand: Gates
- Part number: 2/5VX600
- Brand line: Narrow Section Molded Notch Joined V-Belt
- Cross section: 5VX
- Construction: Notched
- Strand configuration: 2-strand joined PowerBand design
- Top width per strand: 0.62 in. (16 mm)
- Outside circumference: 60 in. (1524 mm)
- Belt material: Ethylene Elastomer (EE)
- Cord material: Polyester
Product Details
Gates Super HC PowerBand belts are built for drives where single belts can vibrate, jump grooves, or turn over on the pulley. The joined-band design ties the strands together so they run as one unit, improving lateral rigidity and helping each strand stay seated in the pulley groove. The molded notched profile adds flexibility for smoother operation in demanding accessory drive systems. If you are sourcing a Gates 2/5VX600 belt for a vehicle or equipment application, this construction supports steadier belt tracking and more uniform load sharing across the drive.
This part cross-references 012580 and GT2/5VX600 for the same application.
What It Helps Address
- Belt vibration in accessory drive systems
- Belt turnover on pulleys
- Belt walk-off from the drive path
- Uneven load distribution across multiple strands
- Tracking instability in narrow section V-belt drives
Installation Notes
Verify the 5VX section, 60-inch outside circumference, and pulley groove match before installation. Inspect pulleys for wear, misalignment, and contamination, since those conditions can shorten belt life and affect tracking. Confirm the drive is specified for a joined V-belt profile before replacing the existing belt with the Gates 2/5VX600.
Quality Assurance
Gates is a recognized supplier of drive belt technology, and this PowerBand design uses a permanent tie band to keep the strands aligned as a single unit. That construction supports stable operation in accessory drive systems where consistent belt control matters.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||