/live/media/ZO/ZO_29570PB_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Gates 2/9570PB Accessory Drive Belt
| Brand | Gates 2/9570PB |
|---|---|
| Position | Fan and Alternator, Alternator, Alternator and Air Conditioning, Fan and Power Steering, and Fan |
| Top Width | 1.125 |
| Top Width | 28 |
| Construction | Notched |
| Cord Material | Polyester |
| Cross Section Designation | Hc50 |
| Strand Quantity | 2 |
| Top Width Per Strand | .5 |
| Top Width Per Strand | 13 |
| Effective Length | 1452 |
| Effective Length | 57.17 |
| Outside Circumference | 1474 |
| Outside Circumference | 58.05 |
| Type | High capacity joined v-belt |
| Belt Material | Epdm |
| Angle | 36 |
| 9837 | Yes |
| Angle | 36 |
| Belt Material | Epdm |
| Contruction | Notched |
| Cord Material | Polyester |
| Notched | Yes |
| Number of Strands | 2 |
| Section | Hc50 |
| Top Width Per Strand (in) | .5 |
| Top Width Per Strand (mm) | 13 |
| Type | High capacity joined v-belt |
| Fits | — |
Joined V-belt design. Multiple belts work as one for steadier load sharing and better pulley tracking.
EPDM construction. Resists heat and wear in demanding accessory drive applications.
Notched profile. Helps the belt flex smoothly around pulleys for consistent operation.
Cross-references Gates 2/9570PB, 2/17570TT and 2T17570 for the same application. See all 7.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
High Capacity Joined V-Belt for Heavy-Duty Drive Systems
The Gates 2/9570PB is a High Capacity Joined V-Belt built for accessory drive systems that see high vibration, heavy loads, and belt-set operation. Its joined construction helps the belt run as a single unit for steadier tracking and more even load distribution.
For service work on vehicles such as Honda Civic and Toyota Corolla applications that use joined V-belt drive layouts, the 2/9570PB provides a direct replacement option in the Gates PowerBand line.
Key Features
- High Capacity Joined V-Belt design for belt-set applications
- Permanent tie band joins multiple V-belts into one unit
- Notched construction for improved flexibility in pulley systems
- EPDM belt material for accessory drive service
- Polyester cord reinforcement for stable belt structure
- HC50 section with 36-degree angle
- Top width per strand: 0.5 in. (13 mm)
- Effective length: 57.17 in. (1452 mm)
- Outside circumference: 58.05 in. (1474 mm)
PowerBand Product Line Details
Gates PowerBand belts are built for applications where separate belts can slip out of sync or wear unevenly. The joined format keeps the strands aligned in the pulley grooves, which supports smoother operation in demanding accessory drive systems. The 2/9570PB follows that design with a two-strand joined layout for consistent belt tracking.
Detailed Description
The Gates 2/9570PB accessory drive belt is engineered for heavy-duty, high-vibration service where belt sets are required. Its joined V-belt construction helps maintain strand alignment, while the notched EPDM profile and polyester cord support flexibility and load handling in pulley-driven accessory systems. This part number, 2/9570PB, is commonly searched for joined V-belt replacement needs on vehicles that use HC50 belt geometry.
This part cross-references Gates 2/17570TT and 2T17570 for the same application.
What It Helps Address
- Belt flutter in high-vibration accessory drive systems
- Uneven wear between matched belt strands
- Tracking issues caused by separate belts running out of sync
- Noise from slipping or misaligned drive belts
- Reduced stability in heavy-duty pulley applications
Installation Notes and Tips
Verify the belt section, effective length, and pulley groove profile before installation. Inspect pulleys, tensioners, and related drive components for wear or contamination, then confirm proper alignment so the joined belt seats evenly across all grooves. Use the vehicle service information for tensioning and routing procedures specific to the application.
Quality Assurance
Gates manufactures the 2/9570PB as part of its PowerBand joined belt lineup for demanding accessory drive service. The belt uses EPDM construction with polyester cord reinforcement and a permanent tie band for stable operation in belt-set applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||