Gates 2/BX97 Accessory Drive Belt - Hydraulics

Gates 2/BX97 Accessory Drive Belt Overview

The Gates 2/BX97 is a classical section molded notch joined V-belt built for heavy-duty accessory drive systems. Its BX cross section, notched construction, and EPDM belt material help it handle small diameter pulleys, back idlers, and demanding operating temperatures.

For buyers searching for a Gates 2/BX97 replacement belt for industrial or automotive accessory drive applications, this belt line is built around consistent power transfer and durability. It is a practical choice when you need a joined V-belt with stable cord support and a profile suited to high-load drives.

Key Features

• Gates Tri-Power belt construction for heavy-duty accessory drive service
• Classical section molded notch joined V-belt design
• BX cross section with 1.31 in. top width and 100 in. outside circumference
• Notched profile for operation around small diameter pulleys and back idlers
• Polyester cord reinforcement for strength and dimensional stability
• EPDM belt material for resistance to cracking and high-temperature exposure
• Two-strand joined construction for applications requiring a BX joined belt

Product Details

The Gates 2/BX97 uses a molded notch design that improves flexibility in tighter drive layouts while maintaining the classical BX section needed for matched accessory drive systems. The EPDM compound is selected to withstand heat and reduce cracking over time, which is important in engines and equipment that see frequent temperature swings. If you are cross-shopping a Gates 2/BX97 for a vehicle or drive system that specifies a BX joined V-belt, this part number should be matched to the required section, width, and outside circumference before installation.

This part cross-references DAYCO DAYRBX97 and Gates GT2/BX97 for the same application.

What It Helps Address

• Belt slippage in accessory drive systems
• Noise caused by worn or glazed V-belts
• Cracking from heat and age
• Poor belt tracking around small pulleys or back idlers
• Loss of drive efficiency from stretched or damaged belts

Installation Notes and Tips

Verify the BX section, 1.31 in. top width, and 100 in. outside circumference against the original belt specification before ordering. Inspect pulleys, idlers, and tensioning components for wear, since a new belt can wear prematurely if the drive system is misaligned or damaged. For vehicle-specific searches, use terms such as Gates 2/BX97 accessory drive belt, BX joined V-belt replacement, and Gates 2/BX97 for heavy-duty drive systems. When searching by application, include make/model keywords such as Ford F-150 or Chevrolet Silverado only if those vehicles are listed in your fitment source.

Quality Assurance

Gates Tri-Power belts are engineered for demanding drive conditions and use a patented EPDM compound to improve heat and crack resistance. The molded notch, polyester cord, and joined BX construction reflect a design focused on stable performance in heavy-duty accessory drive service.