/live/media/ZO/ZO_22919_Fro.jpg)
Gates 22919 Radiator Coolant Hose - Upper
| Brand | Gates 22919 |
|---|---|
| Position | Upper |
| Material | Epdm |
| End 1 Inside Diameter | 1.2 |
| End 1 Inside Diameter | 30 |
| End 2 Inside Diameter | 1.2 |
| End 2 Inside Diameter | 30 |
| Contains Spring | No |
| Centerline Length | 13.9 |
| Centerline Length | 353 |
| Branch Quantity | 0 |
| 9839 | Yes |
| 9845 | 0 |
| Modular Hose | No |
| Molded | Yes |
| Number of Quick Connect Fittings | 0 |
| Product line | Molded Coolant Hose |
| Fits | Acura · 4 vehicles |
OEM-quality specifications. Molded coolant hose built for replacement applications.
EPDM construction. Resists heat and coolant exposure for dependable service.
Molded design. Provides a precise hose shape for easier installation.
Cross-references Anchor 9554, Gates 22919 and 19501PR4A00 for the same application. See all 4.
Gates 22919 Molded Coolant Hose for Acura Integra
The Gates 22919 molded coolant hose is built for upper radiator hose service on select 1990-1993 Acura Integra applications. Made from EPDM and formed to OEM-style dimensions, it provides a direct replacement for the original upper hose on these vehicles.
Gates Molded Coolant Hose products are engineered as application-specific replacement hoses for upper, lower, bypass, heater, and other cooling-system routes. This line is built to match factory-style routing and fitment requirements, helping simplify radiator hose replacement on the Acura Integra.
Key Features
- Part number: 22919
- Fits 1990-1993 Acura Integra, upper
- EPDM construction for cooling-system service
- Molded shape for OEM-style routing
- 1.2 in. / 30 mm inside diameter at both ends
- 13.9 in. / 353 mm centerline length
- No spring included
- No quick-connect fittings
Detailed Description
This Gates radiator coolant hose is shaped for the upper hose position on the 1990-1993 Acura Integra and follows the molded profile needed for proper coolant routing. The EPDM material is commonly used in engine cooling applications for its resistance to heat and coolant exposure. If you are replacing a worn upper hose on an Acura Integra, Gates 22919 provides a direct-fit solution built around the original hose geometry.
This part cross-references Anchor 9554 for the same application.
What It Helps Address
- Cracked or aged upper radiator hose material
- Coolant seepage at the hose body
- Improper hose routing from a previous replacement
- Softening, swelling, or collapse in the cooling hose
- Service issues caused by a mismatched hose shape
Installation Notes and Tips
Verify the hose position before installation; this part is for the upper location on 1990-1993 Acura Integra models. Inspect hose clamps, necks, and adjacent cooling-system components before reassembly, and confirm the hose seats fully on both ends. Check coolant level and inspect for leaks after the engine reaches operating temperature.
Quality Assurance
Gates manufactures molded coolant hoses to OEM-quality specifications for cooling-system replacement service. Part number 22919 is built as an application-specific hose for the listed Acura Integra fitment.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1993 | Acura | Integra | 1.8L | L4 | GAS | Upper | Preferred Hose; Molded Coolant Hose |
| 1992 | Acura | Integra | 1.8L | L4 | GAS | Upper | Preferred Hose; Molded Coolant Hose |
| 1991 | Acura | Integra | 1.8L | L4 | GAS | Upper | Preferred Hose; Molded Coolant Hose |
| 1990 | Acura | Integra | 1.8L | L4 | GAS | Upper | Preferred Hose; Molded Coolant Hose |
| No rows match your filter. | |||||||