/live/media/ZO/ZO_24018_Fro.jpg)
Gates 24018 Radiator Coolant Hose
| Brand | Gates 24018 |
|---|---|
| Position | Lower - Pipe To Engine |
| No | |
| Centerline Length | .91 |
| Centerline Length | 3 |
| Centerline Length | 36 |
| Centerline Length | 914 |
| Centerline Length (ft) | 3 |
| Centerline Length (m) | .91 |
| Construction | 2-Ply |
| Construction | 2-Ply |
| End 1 Inside Diameter | 1.125 |
| End 1 Inside Diameter | 29 |
| End 2 Inside Diameter | 1.125 |
| End 2 Inside Diameter | 29 |
| Material | EPDM |
| Molded | No |
| Working Pressure | 75 |
| Working Pressure (psi) | 75 |
| Product line | Straight Coolant Hose (Standard) |
| Fits | Nissan, Triumph, MG, Subaru, Fiat, and International · 9 vehicles |
Straight coolant hose. Engineered for straight coolant or air connections.
EPDM construction. 2-ply build helps handle demanding cooling-system use.
Standard replacement. A simple hose for automotive, stationary engine, industrial, and home applications.
Cross-references AMS Automotive 6604, Continental 56018 and Dayco 76113 for the same application. See all 6.
Gates 24018 Straight Coolant Hose Overview
The Gates 24018 Straight Coolant Hose is a standard straight hose for coolant or air connections in automotive, stationary engine, industrial, and home applications. Built from EPDM with a 2-ply construction, it is sized with a 1.125 in. inside diameter at both ends and a 3 ft. centerline length for cut-to-length use.
For Nissan Sentra and Nissan 200SX lower pipe-to-engine routing, this straight coolant hose provides a direct replacement option where a straight section is required. The Gates 24018 is a practical choice for 1995-1999 Nissan Sentra and 1995-1998 Nissan 200SX applications that call for a straight coolant hose standard.
Key Features
- EPDM rubber construction for coolant and air connection service
- 2-ply hose design for added reinforcement
- 1.125 in. inside diameter on both ends
- 3 ft. centerline length for custom trimming
- 75 psi working pressure rating
- Straight, non-molded hose design
- Direct fitment coverage for Nissan Sentra and Nissan 200SX lower pipe-to-engine applications
Product Details
Gates Straight Coolant Hose (Standard), part number 24018, is engineered for straight routing where a formed hose is not required. The EPDM material is commonly used in cooling-system service, while the 2-ply construction supports durability in straight coolant or air transfer applications. With matching 1.125 in. end diameters and a 3 ft. centerline length, this hose can be trimmed to the needed length for the vehicle or equipment layout.
This part cross-references Continental 56018 and Dayco 76113 for the same application. It is listed for 1995-1999 Nissan Sentra, lower - pipe to engine, and 1995-1998 Nissan 200SX, lower - pipe to engine.
Common Uses
- Replacing a cracked or split lower coolant hose section
- Restoring coolant flow between the pipe and engine
- Addressing coolant leaks at a straight hose connection
- Replacing a hose that has softened, swollen, or deteriorated
- Servicing Nissan Sentra or Nissan 200SX cooling-system routing
Installation Notes
Measure the required routing before cutting the hose to length. Confirm the 1.125 in. inside diameter matches the pipe and engine connection points, and verify that the hose path remains straight without kinks or sharp bends. Use proper coolant-system service practices and inspect adjoining clamps, pipes, and fittings during installation.
Quality Assurance
Gates manufactures this Vulco Straight Coolant Hose line for straight coolant and air connections across automotive and industrial applications. Part number 24018 is built to the stated EPDM, 2-ply, and 75 psi specifications for the listed Nissan Sentra and Nissan 200SX fitments.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1999 | Nissan | Sentra | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1998 | Nissan | 200SX | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1998 | Nissan | Sentra | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1997 | Nissan | 200SX | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1997 | Nissan | Sentra | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1996 | Nissan | 200SX | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1996 | Nissan | Sentra | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1995 | Nissan | 200SX | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| 1995 | Nissan | Sentra | 1.6L | L4 | GAS | Lower - Pipe To Engine | Cut to Length, 6 1/2"; Straight Coolant Hose (Standard) |
| No rows match your filter. | |||||||