/live/media/ZO/ZO_24256_Fro.jpg)
Gates 24256 Radiator Coolant Hose - Lower, Lower - Engine To Pipe or Lower - Pipe To Radiator
| Brand | Gates 24256 |
|---|---|
| Position | Lower - Pipe To Radiator, Lower - Engine To Pipe, and Lower |
| Material | Epdm |
| Construction | 2-ply |
| End 1 Inside Diameter | 3.5 |
| End 1 Inside Diameter | 89 |
| End 2 Inside Diameter | 3.5 |
| End 2 Inside Diameter | 89 |
| Centerline Length | .91 |
| Centerline Length | 3 |
| Centerline Length | 36 |
| Centerline Length | 914 |
| Working Pressure | 18 |
| 9839 | No |
| Centerline Length (ft) | 3 |
| Centerline Length (m) | .91 |
| Construction | 2-ply |
| Molded | No |
| Working Pressure (psi) | 18 |
| Fits | — |
Heavy-duty 2-ply construction. Adds flexibility and strength for demanding coolant and air service.
EPDM tube and cover. Resists cold-water leaks and stays soft under harsh conditions.
Straight coolant hose. A simple, straight design for clean routing and dependable flow.
Cross-references Dayco 77350GL, Four Seasons 24256 and Four Seasons 57256 for the same application. See all 9.
Heavy-Duty Straight Coolant Hose
The Gates 24256 Straight Coolant Hose is a heavy-duty radiator coolant hose built for demanding coolant and air transfer applications. Its 2-ply bias fabric construction adds flexibility and strength, while the EPDM tube and cover help resist cold water leaks and stay pliable in harsh operating conditions.
For buyers searching for a straight coolant hose for heavy-duty truck cooling systems, Gates 24256 delivers a straightforward replacement option with the dimensions needed for direct hose routing. It is also a practical choice when sourcing Gates 24256 hose replacement parts for radiator and coolant plumbing service.
Key Features
- Brand: Gates
- Part number: 24256
- Product line: Green Stripe Straight Coolant Hose
- Material: EPDM
- Construction: 2-ply bias fabric
- Straight hose design for coolant and air applications
- 3.5 in. inside diameter at both ends
- 3 ft. centerline length
- Working pressure: 18 psi
Product Details
The Gates Green Stripe 2-Ply Straight Coolant Hose line is built for heavy-duty service where flexibility, pressure resistance, and long-term coolant sealing matter. The EPDM tube and cover are formulated to remain soft and pliable, helping the hose maintain performance in cold-start and adverse operating conditions. With a straight 3.5-inch ID profile and 3-foot centerline length, this hose suits radiator coolant routing where a non-molded straight section is required. Gates 24256 is a direct-fit style hose for service work that calls for a durable, straight coolant hose assembly.
This part cross-references Four Seasons 24256 for the same application.
What It Helps Address
- Coolant hose cracking or hardening from age and heat cycling
- Cold water leaks in heavy-duty cooling systems
- Loss of flexibility in straight radiator hose sections
- Pressure-related seepage at a 3.5-inch hose connection
- Replacement needs for Gates 24256 and related heavy-duty hose service
Installation Notes and Tips
Verify the hose inside diameter, centerline length, and routing before installation. Measure the existing hose path to confirm the 3-foot straight length and check that both connection points require a 3.5-inch ID hose. Inspect clamps, necks, and adjoining pipes for wear or corrosion before installing the new hose. For vehicle-specific searches, this hose is commonly referenced in heavy-duty cooling system service for Ford F-350 and Chevrolet Silverado applications where a straight coolant hose is needed.
Quality Assurance
Gates is a recognized supplier of cooling system components, and the Green Stripe hose line uses EPDM construction and reinforced 2-ply fabric for durability in demanding service conditions. Part number 24256 is built to meet the stated pressure and dimensional requirements for radiator coolant hose replacement.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||