/live/media/ZO/ZO_26218_Kit.jpg)
Gates 26218 Turbocharger Intercooler Hose Kit - Intercooler to Pipe (Cold Side)
| Brand | Gates 26218 |
|---|---|
| Position | Intercooler to Pipe (Cold Side) |
| 75 | |
| Bolt Type | .25 in. - 28 Plated Steel Male Pipe Thread |
| Centerline Length | 4.09 |
| Centerline Length | 104 |
| Centerline Length (in) | 4.09 |
| Centerline Length (mm) | 104 |
| Clamp 1 - Band Width (in) | .75 |
| Clamp 1 - Band Width (mm) | 19.1 |
| Clamp 1 - Bolt Type | .25 in. - 28 Plated Steel Male Pipe Thread |
| Clamp 1 - Clamping Range Max (in) | 3.375 |
| Clamp 1 - Clamping Range Max (mm) | 85.7 |
| Clamp 1 - Clamping Range Min (in) | 3.0625 |
| Clamp 1 - Clamping Range Min (mm) | 77.8 |
| Clamp 1 - Nut Type | .4375 in. Hex-Head |
| Clamp 1 - Recommended Torque (in/lbs) | 75 |
| Clamp 2 - Band Width (in) | .75 |
| Clamp 2 - Band Width (mm) | 19.1 |
| Clamp 2 - Bolt Type | .25 in. - 28 Plated Steel Male Pipe Thread |
| Clamp 2 - Clamping Range Max (in) | 3.375 |
| Clamp 2 - Clamping Range Max (mm) | 85.7 |
| Clamp 2 - Clamping Range Min (in) | 3.0625 |
| Clamp 2 - Clamping Range Min (mm) | 77.8 |
| Clamp 2 - Nut Type | .4375 in. Hex-Head |
| Clamp 2 - Recommended Torque (in/lbs) | 75 |
| Clamp Band Width | .75 |
| Clamp Band Width | 19.1 |
| Contents | 1 Turbocharger Hose, 2 T-Bolt Clamps |
| End 1 Inside Diameter | 3 |
| End 1 Inside Diameter | 76 |
| End 2 Inside Diameter | 3 |
| End 2 Inside Diameter | 76 |
| Inside Diameter 1 (in) | 3 |
| Inside Diameter 1 (mm) | 76 |
| Inside Diameter 2 (in) | 3 |
| Inside Diameter 2 (mm) | 76 |
| Maximum Clamping Length | 3.375 |
| Maximum Clamping Length | 85.7 |
| Minimum Clamping Length | 3.0625 |
| Minimum Clamping Length | 77.8 |
| Number of Rings | 2 |
| Nut Type | .4375 in. Hex-Head |
| OE Comparison Rating | OE Improved |
| Ring Quantity | 2 |
| Product line | Turbocharger Hose Kits (Molded) |
| Fits | Ford · 6 vehicles |
OE improved. A superior alternative to original replacement hoses.
Molded hose kit. One-stop replacement for a complete turbocharger hose system.
T-bolt clamps included. Two clamps help secure the hose connection.
Cross-references Dorman - OE Solutions 904-241, Gates 26218 and 8C3Z 6N651 A for the same application. See all 6.
Turbocharger Hose Kit for Super Duty Diesel Applications
Gates 26218 is a molded turbocharger hose kit for replacing the cold-side intercooler-to-pipe hose on select Ford Super Duty trucks. It is built as a complete hose-system replacement solution for 2008-2010 Ford F-250 Super Duty and 2008-2010 Ford F-350 Super Duty applications.
Key Features
- Molded turbocharger hose kit for the intercooler to pipe, cold-side location
- 3 in. inside diameter at both ends for a direct-fit style connection
- 104 mm centerline length for the specified routing geometry
- Includes T-bolt clamps with 19.1 mm band width
- Clamp range: 77.8 mm to 85.7 mm
- OE Improved comparison rating for updated replacement performance
- Gates 26218 is listed for 2008-2010 Ford F-250 Super Duty and Ford F-350 Super Duty
Product Details
The Gates Turbocharger Hose Kits (Molded) line is built for full turbocharger hose system replacement when the original hose assembly needs to be renewed. Gates positions this line as an improved alternative to OEM replacement hoses, with a focus on long service life and dependable fitment. Part number 26218 includes a molded turbocharger hose and T-bolt clamps, with 3-inch ends, a 4.09-inch centerline length, and plated steel male pipe thread clamp hardware specified for the application.
For buyers searching for a 2008-2010 Ford F-250 Super Duty intercooler to pipe cold side hose, or a 2008-2010 Ford F-350 Super Duty turbocharger hose replacement, Gates 26218 provides a direct application match. This part cross-references Dorman OE Solutions 904-241 for the same application.
Common Problems This Hose Can Address
- Boost leaks caused by a worn or damaged cold-side turbo hose
- Cracking, splitting, or softening in the intercooler-to-pipe connection
- Loose or inconsistent sealing at the turbocharger hose joint
- Loss of charge-air pressure from deteriorated hose material
- Fitment issues when replacing an aging OEM-style hose assembly
Installation Notes and Tips
Verify the vehicle year, model, and cold-side intercooler-to-pipe routing before installation. Confirm the 3-inch end diameters and clamp range against the existing connection points, and tighten the T-bolt clamps to the specified 75 in/lbs recommended torque. Inspect adjoining pipes, couplers, and sealing surfaces for wear before installing the new hose.
Quality Assurance
Gates turbocharger hose kits are engineered as OE-improved replacement parts for demanding underhood conditions. Part number 26218 is built to replace the specified hose assembly on 2008-2010 Ford F-250 Super Duty and Ford F-350 Super Duty diesel applications with the listed fitment and dimensions.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2010 | Ford | F-250 Super Duty | 6.4L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2010 | Ford | F-350 Super Duty | 6.4L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2009 | Ford | F-250 Super Duty | 6.4L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2009 | Ford | F-350 Super Duty | 6.4L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2008 | Ford | F-250 Super Duty | 6.4L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| 2008 | Ford | F-350 Super Duty | 6.4L | V8 | DIESEL | Intercooler to Pipe (Cold Side) | Turbocharger Hose Kits (Molded) |
| No rows match your filter. | |||||||